TSL267
HIGH-SENSITIVITY
IR LIGHT-TO-VOLTAGE CONVERTER
TAOS033E − SEPTEMBER 2007
6
r
r
Copyright E 2007, TAOS Inc.
The LUMENOLOGY r Company
www.taosinc.com
MECHANICAL DATA
The device is supplied in a visible light-blocking plastic three-lead through-hole sidelooker package (S).
PACKAGE S PLASTIC SINGLE-IN-LINE SIDE-LOOKER PACKAGE
1.642.60
2.30
4.60
R 0.90
1.80
0.42
1
2 y 2
0.47 TYP
TOP VIEW
SIDE VIEWFRONT VIEW
0.42
1.56
14.86 + 0.50
4.60
0.15
Note B
Lead Free
Available
Pb
NOTES: A. All linear dimensions are in millimeters; tolerance is ± 0.25 mm unless otherwise stated.
B. Dimension is to center of lens arc, which is located below the package face.
C. The integrated photodiode active area is round with a typical diameter of 0.75 mm and is typically located in the center of the lens
and 0.97 mm below the top of the lens surface.
D. Lead finish for TSL267: solder dipped, 63% Sn/37% Pb. Lead finish for TSL267−LF: solder dipped, 100% Sn..
E. This drawing is subject to change without notice.
Figure 7. Package S — Single-In-Line Side-Looker Package Configuration