74HC_HCT4051_Q100 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 2 — 8 October 2012 6 of 31
NXP Semiconductors
74HC4051-Q100; 74HCT4051-Q100
8-channel analog multiplexer/demultiplexer
7. Functional description
7.1 Function table
[1] H = HIGH voltage level;
L = LOW voltage level;
X = don’t care.
8. Limiting values
[1] To avoid drawing V
CC
current out of terminal Z, when switch current flows into terminals Yn, the voltage drop across the bidirectional
switch must not exceed 0.4 V. If the switch current flows into terminal Z, no V
CC
current will flow out of terminals Yn, and in this case
there is no limit for the voltage drop across the switch, but the voltages at Yn and Z may not exceed V
CC
or V
EE
.
[2] For SO16 packages: above 70 C the value of P
tot
derates linearly with 8 mW/K.
For TSSOP16 package: above 60 C the value of P
tot
derates linearly with 5.5 mW/K.
For DHVQFN16 packages: above 60 C the value of P
tot
derates linearly with 4.5 mW/K.
Table 3. Function table
[1]
Input Channel ON
E S2 S1 S0
LLLLY0toZ
LLLHY1toZ
L L H L Y2toZ
L L H H Y3toZ
LHLLY4toZ
LHLHY5toZ
LHHLY6toZ
LHHHY7toZ
HXXXswitches off
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to V
SS
= 0 V (ground).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage
[1]
0.5 +11.0 V
I
IK
input clamping current V
I
< 0.5 V or V
I
>V
CC
+0.5V - 20 mA
I
SK
switch clamping current V
SW
< 0.5 V or V
SW
>V
CC
+0.5V - 20 mA
I
SW
switch current 0.5 V < V
SW
<V
CC
+0.5V - 25 mA
I
EE
supply current - 20 mA
I
CC
supply current - 50 mA
I
GND
ground current - 50 mA
T
stg
storage temperature 65 +150 C
P
tot
total power dissipation
[2]
- 500 mW
P power dissipation per switch - 100 mW
