OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

AXH003A0XZ

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18
GE
Data Sheet
September 25, 2015 ©2015 General Electric Company. All rights reserved.
Austin MiniLynx
TM
: SIP Non-Isolated DC-DC Power Modules
2.4Vdc –5.5Vdc input; 0.75Vdc to 3.63Vdc output; 3A Output Current
Features
Compliant to RoHS EU Directive 2011/65/EU (-Z versions)
Compliant to RoHS EU Directive 2011/65/EU under
exemption 7b (Lead solder exemption). Exemption 7b
will expire after June 1, 2016 at which time this product
will no longer be RoHS compliant (non-Z versions)
Delivers up to 3A output current
High efficiency – 94% at 3.3V full load (V
IN
= 5.0V)
Small size and low profile:
22.9 mm x 10.2 mm x 6.63 mm
(0.90 in. x 0.40 in. x 0.261 in.)
Low output ripple and noise
High Reliability:
Calculated MTBF = 11.9M hours at 25
o
C Full-load
Constant switching frequency (300 kHz)
Output voltage programmable from 0.75 Vdc to 3.63Vdc
via external resistor
Line Regulation: 0.4% (typical)
Load Regulation: 0.4% (typical)
Temperature Regulation: 0.4 % (typical)
Remote On/Off
Output overcurrent protection (non-latching)
Wide operating temperature range (-40°C to 85°C)
UL* 60950-1Recognized, CSA
†
C22.2 No. 60950-1-03
Certified, and VDE
‡
0805:2001-12 (EN60950-1) Licensed
ISO** 9001 and ISO 14001 certified manufacturing
facilities
Applications
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
Servers and storage applications
Networking equipment
Enterprise Networks
Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications
Description
Austin MiniLynx
TM
SIP (single-in-line) power modules are non-isolated DC-DC converters that can deliver up to 3A of output
current with full load efficiency of 94.0% at 3.3V output. These modules provide a precisely regulated output voltage
programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage (V
IN
= 2.4 – 5.5Vdc). Their
open-frame construction and small footprint enable designers to develop cost- and space-efficient solutions. In addition to
sequencing, standard features include remote On/Off, programmable output voltage and over current protection.
* UL is a registered trademark of Underwriters Laboratories, Inc.
†
CSA is a registered trademark of Canadian Standards Association.
‡
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
RoHS Compliant
GE
Data Sheet
Austin MiniLynx
TM
: SIP Non-Isolated DC-DC Power Modules
2.4Vdc – 5.5Vdc input; 0.75Vdc to 3.63Vdc output; 3A Output Current
September 25, 2015
©2015 General Electric Company. All rights reserved.
Page
2
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings
only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations
sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.
Parameter Device Symbol Min Max Unit
Input Voltage All V
IN
-0.3 5.8 Vdc
Continuous
Operating Ambient Temperature All T
A
-40 85 °C
(see Thermal Considerations section)
Storage Temperature All T
stg
-55 125 °C
Electrical Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.
Parameter Device Symbol Min Typ Max Unit
Operating Input Voltage V
O,set
≤ V
IN
– 0.5V V
IN
2.4
5.5 Vdc
Maximum Input Current All I
IN,max
3.0 Adc
(V
IN
= V
IN, min
to V
IN, max
, I
O
=I
O, max
V
O,set
= 3.3Vdc)
Input No Load Current V
O,set
= 0.75Vdc I
IN,No load
10 mA
(V
IN
= 5.0Vdc, I
O
= 0, module enabled) V
O,set
= 3.3Vdc I
IN,No load
17 mA
Input Stand-by Current All I
IN,stand-by
0.6 mA
(V
IN
= 5.0Vdc, module disabled)
Inrush Transient All I
2
t 0.04 A
2
s
Input Reflected Ripple Current, peak-to-peak
(5Hz to 20MHz, 1μH source impedance; V
IN, min
to V
IN,
max,
I
O
= I
Omax
; See Test configuration section)
All 35 mAp-p
Input Ripple Rejection (120Hz) All 30 dB
CAUTION: This power module is not internally fused. An input line fuse must always be used.
This power module can be used in a wide variety of applications, ranging from simple standalone operation to being part of a
complex power architecture. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety
and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 6 A
(see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input
current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information.
GE
Data Sheet
Austin MiniLynx
TM
: SIP Non-Isolated DC-DC Power Modules
2.4Vdc – 5.5Vdc input; 0.75Vdc to 3.63Vdc output; 3A Output Current
September 25, 2015
©2015 General Electric Company. All rights reserved.
Page
3
Electrical Specifications (continued)
Parameter Device Symbol Min Typ Max Unit
Output Voltage Set-point All V
O, set
-2.0 V
O, set
+2.0 % V
O, set
(V
IN
=
IN, min
, I
O
=I
O, max
, T
A
=25°C)
Output Voltage All V
O, set
-3%
+3% % V
O, set
(Over all operating input voltage, resistive load, and
temperature conditions until end of life)
Adjustment Range All V
O
0.7525 3.63 Vdc
Selected by an external resistor
Output Regulation
Line (V
IN
=V
IN, min
to V
IN, max
) All
0.4
% V
O, set
Load (I
O
=I
O, min
to I
O, max
) All
0.4
% V
O, set
Temperature (T
ref
=T
A, min
to T
A, max
) All
0.4
% V
O, set
Output Ripple and Noise on nominal output
(V
IN
=V
IN, nom
and I
O
=I
O, min
to I
O, max
Cout = 1μF ceramic//10μFtantalum capacitors)
RMS (5Hz to 20MHz bandwidth) All
10 15 mV
rms
Peak-to-Peak (5Hz to 20MHz bandwidth) All
25 50 mV
pk-pk
External Capacitance
ESR ≥ 1 mΩ All C
O, max
1000 μF
ESR ≥ 10 mΩ All C
O, max
3000 μF
Output Current All I
o
0 3 Adc
Output Current Limit Inception (Hiccup Mode ) All I
O, lim
220
% I
o
(V
O
= 90% of V
O, set
)
Output Short-Circuit Current All I
O, s/c
2
Adc
(V
O
≤250mV) ( Hiccup Mode )
Efficiency
V
O,set
=
0 75Vdc
η 81.5 %
V
IN
= V
IN, nom
, T
A
=25°C
V
O, set
=
1 2Vdc
η 87.0 %
I
O
=I
O, max ,
V
O
= V
O,set
V
O,set
=
1 5Vdc
η 89.0 %
V
O,set
=
1 8Vdc
η 90.0 %
V
O,set
=
2 5Vdc
η 93.0 %
V
O,set
=
3 3Vdc
η 94.0 %
Switching Frequency All f
sw
300
kHz
Dynamic Load Response
(dIo/dt=2.5A/µs; V
IN
= V
IN, nom
; T
A
=25°C)
All V
pk
250
mV
Load Change from Io= 50% to 100% of Io,max; 1μF
ceramic// 10 μF tantalum
Peak Deviation
Settling Time (Vo<10% peak deviation)
All t
s
50
µs
(dIo/dt=2.5A/µs; V
IN
= V
IN, nom
; T
A
=25°C)
All V
pk
250
mV
Load Change from Io= 100% to 50%of Io,max: 1μF
ceramic// 10 μF tantalum
Peak Deviation
Settling Time (Vo<10% peak deviation)
All t
s
50
µs
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18

AXH003A0XZ

Mfr. #:
Buy AXH003A0XZ
Manufacturer:
Description:
Non-Isolated DC/DC Converters 2.4-5.5Vin 3A SIP 0.75-3.63Vout
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet