8304I Data Sheet
©2015 Integrated Device Technology, Inc December 10, 20153
TABLE 3A. POWER SUPPLY DC CHARACTERISTICS, V
DD
= V
DDO
= 3.3V±5%, TA = -40°C TO 85°C
Symbol Parameter Test Conditions Minimum Typical Maximum Units
V
DD
Power Supply Voltage 3.135 3.3 3.465 V
V
DDO
Output Power Supply Voltage 3.135 3.3 3.465 V
I
DD
Power Supply Current 18 mA
I
DDO
Output Supply Current 11 mA
TABLE 3C. LVCMOS / LVTTL DC CHARACTERISTICS, V
DD
= V
DDO
= 3.3V±5%, TA = -40°C TO 85°C
Symbol Parameter Test Conditions Minimum Typical Maximum Units
V
IH
Input High Voltage 2 V
DD
+ 0.3 V
V
IL
Input Low Voltage -0.3 1.3 V
I
IH
Input High Current V
DD
= V
IN
= 3.465V 150 µA
I
IL
Input Low Current V
DD
= 3.465V, V
IN
= 0V -5 µA
V
OH
Output High Voltage
Refer to NOTE 1 2.6 V
I
OH
= -16mA 2.9 V
I
OH
= -100uA 3 V
V
OL
Output Low Voltage
Refer to NOTE 1 0.5 V
I
OL
= 16mA 0.25 V
I
OL
= 100uA 0.15 V
NOTE 1: Outputs terminated with 50
ΩΩ to V
DDO
/2. See Parameter Measurement Section, “3.3V Output Load Test Circuit”.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, V
DD
4.6V
Inputs, V
I
-0.5V to V
DD
+ 0.5 V
Outputs, V
O
-0.5V to V
DDO
+ 0.5V
Package Thermal Impedance, θ
JA
112.7°C/W (0 lfpm)
Storage Temperature, T
STG
-65°C to 150°C
NOTE: Stresses beyond those listed under Absolute
Maximum Ratings may cause permanent damage to the
device. These ratings are stress specifi cations only. Functional
operation of product at these conditions or any conditions beyond
those listed in the DC Characteristics or AC Characteristics is not
implied. Exposure to absolute maximum rating conditions for ex-
tended periods may affect product reliability.
TABLE 3B. POWER SUPPLY DC CHARACTERISTICS, V
DD
= 3.3V±5%, V
DDO
= 2.5V±5%, TA = -40°C TO 85°C
Symbol Parameter Test Conditions Minimum Typical Maximum Units
V
DD
Positive Supply Voltage 3.135 3.3 3.465 V
V
DDO
Output Supply Voltage 2.375 2.5 2.625 V
I
DD
Power Supply Current 18 mA
I
DDO
Output Supply Current 11 mA
