OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

RST-10000-24

P1-P3P4-P6P7-P9P10-P10
◎ψ3 3 wire / 230VAC△
◎ψ3 4 wire / Y 400VAC
230V
230V
T
RST-10000
S
R
FG
L1
N1
L2
N2
L3
N3
Fig 1.1
AC Power Connection
Function Manual
Fig 1.1
1.Remote Sense
※ The remote sense function compensates the voltage drop on the cable, between the power supply and the load, up to 0.3V.
LOAD
-V
+V
Sense lines should be twisted in pairs to minimize
noise pick-up.
+V
-V
PIN5 -S
PIN3 +S
10000W Power Supply with Single Output
RST-10000 series
File Name:RST-10000-SPEC 2018-01-15
DIP
SW
CN993
CN992
CN991
T
N
S
R
RST-10000
FG
L1
N1
L2
N2
L3
N3
230V
400V
Fig 1.2
SVR
※ If the remote sense function is not required,+S and +V of the output terminal, as well as -S and -V, need to be connected to be free from noise and
interference. (+S and +V of the output terminal, -S and -V are connected as factory default setting)
10000W Power Supply with Single Output
RST-10000 series
File Name:RST-10000-SPEC 2018-01-15
Fig 2.2
2.Voltage Adjustment
(a)Have the DIP switch position-3 set as
(a)Have the DIP switch position-3 set as
(b)Output voltage can be trimmed by SVR.
(b)The output voltage can be trimmed to 20~120% of the nominal voltage by applying EXTERNAL VOLTAGE between + and on CN992 or CN993.PV PV-
(1)by potentiometer (SVR)
(2)by Output Voltage Programming*
Nominal Vout
V
12345
6
20
40
60
80
100
120
EXTERNAL VOLTAGE (VDC)
OUTPUT VOLTAGE (%)
Non-Linear
ON
OFF
123
ON
OFF
123
PIN6 PV+PIN4 PV-
EXTERNAL VOLTAGE (DC)
CN993
SVR
Fig 2.1
LOAD
-V
+V
+V
-V
DIP
SW
DIP
SWITCH
CN993
CN992
CN991
SVR
*: or, PV/remote voltage programming / remote adjust / margin programming / dynamic voltage trim.
+S and +V, as well as -S and -V, need to be connected as factory default setting◎
10000W Power Supply with Single Output
RST-10000 series
File Name:RST-10000-SPEC 2018-01-15
Fig 3.2
Rated Current
V
12345
20
40
60
80
100
EXTERNAL VOLTAGE (VDC)
CONSTANT CURRENT LEVEL (%)
Non-Linear
3.Current Adjustment
(a)Have the DIP switch position-2 set as
(b)Output current is set default value.
(1)Default Overload Protection(OLP) value
(2)by Constant Current Level Programming**
(a)Have the DIP switch position-2 set as
ON
OFF
123
ON
OFF
123
(b)The constant current level can be trimmed to 20~100% of the rated current by applying EXTERNAL VOLTAGE between and on CN992 or CN993.PC+ PC-
**: or, PC/remote current programming / dynamic current trim.
PIN9 PC+PIN7 PC-
EXTERNAL VOLTAGE (DC)
Fig 3.1
LOAD
-V
+V
DIP
SW
CN993
CN992
CN991
+V
-V
CN993
SVR
+S and +V, as well as -S and -V, need to be connected as factory default setting◎
P1-P3P4-P6P7-P9P10-P10

RST-10000-24

Mfr. #:
Buy RST-10000-24
Manufacturer:
MEAN WELL
Description:
Switching Power Supplies 9600W 24V 400A 3 Phase AC input
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet