HMC753 Data Sheet
Rev. D | Page 12 of 13
Table 5. List of Materials for Evaluation PCB
122826-HMC753LP4E
1
Item Description
J5, J6 SMA connectors
J1 to J4 DC pins
C1 to C3 100 pF capacitors, 0402 package
C4 to C6 10,000 pF capacitors, 0603 package
C7 to C9 4.7 µF capacitors, tantalum
U1 HMC753 amplifier
PCB
2
122824-2 evaluation PCB
1
Reference this number when ordering the complete evaluation PCB.
2
Circuit board material: Rogers 4350 or Arlon 25FR.
It is recommended that the circuit board used in this application
use RF circuit design techniques. It is also recommended that
signal lines have a 50 Ω impedance, and the package ground
leads and exposed pad be connected directly to the ground
plane, as shown in Figure 22. Use a sufficient number of via
holes to connect the top and bottom ground planes. Mount the
evaluation board to an appropriate heat sink. The evaluation
circuit board shown is available from Analog Devices, Inc.,
upon request.
