OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

B57127P100M301

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P19
Dimensions (mm)
Lead
spacing
5 mm
Tolerance of
lead spacing
5 mm
Lead
spacing
7.5 mm
Tolerance of
lead spacing
7.5 mm
Remarks
w ≤12.0 ≥12.0 please refer to dimensional
drawings
th 6.0 max. 7 max. please refer to dimensional
drawings
d 0.5/0.6 ±0.05 0.8/1.0 ±0.05 please refer to dimensional
drawings
P
0
12.7 ±0.3 12.7 ±0.3 ±1 mm / 20 sprocket holes
P
1
3.85 ±0.7 8.95 ±0.8
F 5.0 +0.6/0.1 7.5 ±0.8
∆h 0 ±2.0 0 Depends on th measured at top
of component body
∆p 0 ±1.3 0 ±2.0
W 18.0 ±0.5 18.0 ±0.5
W
0
5.5 min. 11.0 min. peel-off force ≥5 N
W
1
9.0 +0.75/0.5 9.0 +0.75/0.5
W
2
3.0 max. 3.0 max.
H 18.0 +2.0/0 18.0 +2.0/0 applies only to uncrimped
types
H
0
16.0 ±0.5 16.0 ±0.5 applies only to crimped types
H
1
32.2 max. 45.0 max.
D
0
4.0 ±0.2 4.0 ±0.2
t 0.9 max. 0.9 max. without wires
L 11.0 max. 11.0 max.
L
1
4.0 max. 4.0 max.
Inrush current limiters B57127P0***M301
ICLs P27
Page 10 of 19Please read Cautions and warnings and
Important notes at the end of this document.
Types of packing
Reel packing
Reel dimensions (in mm)
Reel type Series pcs. per reel d f n w
I S153, S235 1500 360 max. 31 ±1 approx. 45 54 max.
I S236 1000 360 max. 31 ±1 approx. 45 54 max.
II P11, P13 1500 500 max. 23 ±1 approx. 59 72 max.
II S237, S238, S364 1000 500 max. 23 ±1 approx. 59 72 max.
Ammo packing
Ammo
type
Series pcs. per
package
x y z
I S153,
S235,
S236
1000 45 335 272
II P11,
P13,
S237,
S238,
S364
750 55 340 340
Ammo packing dimensions (in mm)
Bulk packing
The components are packed in cardboard boxes, the size of which depends on the order quantity.
Series S464 and P27 is only available as bulk.
Inrush current limiters B57127P0***M301
ICLs P27
Page 11 of 19Please read Cautions and warnings and
Important notes at the end of this document.
Mounting instructions
1 Soldering
1.1 Leaded NTC thermistors
Leaded thermistors comply with the solderability requirements specified by CECC.
When soldering, care must be taken that the NTC thermistors are not damaged by excessive
heat. The following maximum temperatures, maximum time spans and minimum distances have
to be observed:
Dip soldering Iron soldering
Bath temperature max. 260 °C max. 360 °C
Soldering time max. 4 s max. 2 s
Distance from thermistor min. 6 mm min. 6 mm
Under more severe soldering conditions the resistance may change.
Solderability (test to IEC 60068-2-20)
Preconditioning: Immersion into flux F-SW 32.
Evaluation criterion: Wetting of soldering areas ≥95%.
Solder Bath temperature (°C) Dwell time (s)
SnAg (3.0 ... 4.0), Cu (0.5 ... 0.9) 245 ±3 3
1.1.1 Resistance to soldering heat (test to IEC 60068-2-20)
Preconditioning: Immersion into flux F-SW 32.
Solder Bath temperature (°C) Dwell time (s)
SnAg (3.0 ... 4.0), Cu (0.5 ... 0.9) 260 5 10
Inrush current limiters B57127P0***M301
ICLs P27
Page 12 of 19Please read Cautions and warnings and
Important notes at the end of this document.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P19

B57127P100M301

Mfr. #:
Buy B57127P100M301
Manufacturer:
EPCOS / TDK
Description:
NTC THERMISTOR P27/10 /M
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet