SRV05-4MR6T1G Datasheet SRV05-4MR6T1G | P1-P3

November, 2009 − Rev. 0

1 Publication Order Number:

SRV05−4MR6/D

SRV05-4MR6

Transient Voltage

Suppressors

ESD Protection Diodes with Low

Clamping Voltage

The SRV05−4MR6 transient voltage suppressor is designed to

protect high speed data lines from ESD, EFT, and lighting.

Features

• Protects 4 I/O Lines

• Low Working Voltage: 5 V

• Low Clamping Voltage

• Low Capacitance (<5 pF) for High Speed Interfaces

• Transient Protection for High Speed Lines to:

IEC61000−4−2 (ESD) ±15 kV (air), ±8 kV (contact)

IEC61000−4−4 (EFT) 40 A

IEC61000−4−5 (Lightning) 12 A

• TSOP−6 is Footprint Compatible with SOT−23 6 Lead,

SC−59 6 Lead and SC−74

• UL Flammability Rating of 94 V−0

• This is a Pb−Free Device

Typical Applications

• High Speed Communication Line Protection

• USB 1.1 and 2.0 Power and Data Line Protection

• Digital Video Interface (DVI)

• Monitors and Flat Panel Displays

MAXIMUM RATINGS (T

= 25°C unless otherwise noted)

Rating

Symbol Value Unit

Peak Power Dissipation

8 x 20 ms @ T

= 25°C (Note 1)

300 W

Operating Junction Temperature Range T

−55 to +125 °C

Storage Temperature Range T

stg

−55 to +150 °C

Lead Solder Temperature −

Maximum (10 Seconds)

260 °C

Human Body Model (HBM)

Machine Model (MM)

IEC 61000−4−2 Air (ESD)

IEC 61000−4−2 Contact (ESD)

ESD 16000

400

15000

8000

IEC 61000−4−4 (5/50 ns) EFT 40 A

IEC 61000−4−5 (8 x 20 ms)

− 12 A

Stresses exceeding Maximum Ratings may damage the device. Maximum

Ratings are stress ratings only. Functional operation above the Recommended

Operating Conditions is not implied. Extended exposure to stresses above the

Recommended Operating Conditions may affect device reliability.

1. Non−repetitive current pulse per Figure 5 (Pin 5 to Pin 2)

See Application Note AND8308/D for further description of

survivability specs.

LOW CAPACITANCE

TVS ARRAY

300 WATTS PEAK POWER

6 VOLTS

MARKING DIAGRAM

Device Package Shipping

ORDERING INFORMATION

TSOP−6

CASE 318G

PLASTIC

PIN CONFIGURATION

AND SCHEMATIC

6 I/O

5 V

4 I/O

I/O 1

I/O 3

http://onsemi.com

63 = Specific Device Code

M = Date Code

G = Pb−Free Package

SRV05−4MR6T1G TSOP−6

(Pb−Free)

3000/Tape & Reel

†For information on tape and reel specifications,

including part orientation and tape sizes, please

refer to our Tape and Reel Packaging Specification

Brochure, BRD8011/D.

*Date Code orientation may vary

depending upon manufacturing location.

(Note: Microdot may be in either location)

SRV05−4MR6

http://onsemi.com

ELECTRICAL CHARACTERISTICS

= 25°C unless otherwise noted)

Symbol

Parameter

Maximum Reverse Peak Pulse Current

Clamping Voltage @ I

RWM

Working Peak Reverse Voltage

Maximum Reverse Leakage Current @ V

RWM

Breakdown Voltage @ I

Test Current

Forward Current

Forward Voltage @ I

Peak Power Dissipation

C Capacitance @ V

= 0 and f = 1.0 MHz

*See Application Note AND8308/D for detailed explanations of

datasheet parameters.

Uni−Directional TVS

RWM

ELECTRICAL CHARACTERISTICS (T

=25°C unless otherwise specified)

Parameter

Symbol Conditions Min Typ Max Unit

Reverse Working Voltage V

RWM

(Note 2) 5.0 V

Breakdown Voltage V

=1 mA, (Note 3) 6.0 V

Reverse Leakage Current I

RWM

= 5 V 5.0

Clamping Voltage V

= 1 A (Note 4) 12.5 V

Clamping Voltage V

= 5 A (Note 4) 17.5 V

Junction Capacitance C

= 0 V, f=1 MHz between I/O Pins and GND 3.0 5.0 pF

Junction Capacitance C

= 0 V, f=1 MHz between I/O Pins 1.5 3.0 pF

Clamping Voltage V

Per IEC 61000−4−2 (Note 5) Figure 1 and 2 V

2. TVS devices are normally selected according to the working peak reverse voltage (V

RWM

), which should be equal or greater than the DC

or continuous peak operating voltage level.

3. V

is measured at pulse test current I

4. Non−repetitive current pulse per Figure 5 (Any I/O Pin to Ground)

5. For test procedure see Figures 3 and 4 and Application Note AND8307/D.

Figure 1. ESD Clamping Voltage Screenshot

Positive 8 kV Contact per IEC61000−4−2

Figure 2. ESD Clamping Voltage Screenshot

Negative 8 kV Contact per IEC61000−4−2

SRV05−4MR6

http://onsemi.com

IEC 61000−4−2 Spec.

Level

Test

Voltage

(kV)

First Peak

Current

(A)

Current at

30 ns (A)

Current at

60 ns (A)

1 2 7.5 4 2

2 4 15 8 4

3 6 22.5 12 6

4 8 30 16 8

peak

90%

10%

IEC61000−4−2 Waveform

100%

I @ 30 ns

I @ 60 ns

= 0.7 ns to 1 ns

Figure 3. IEC61000−4−2 Spec

Figure 4. Diagram of ESD Test Setup

50 W

Cable

TVS

Oscilloscope

ESD Gun

The following is taken from Application Note

AND8308/D − Interpretation of Datasheet Parameters

for ESD Devices.

ESD Voltage Clamping

For sensitive circuit elements it is important to limit the

voltage that an IC will be exposed to during an ESD event

to as low a voltage as possible. The ESD clamping voltage

is the voltage drop across the ESD protection diode during

an ESD event per the IEC61000−4−2 waveform. Since the

IEC61000−4−2 was written as a pass/fail spec for larger

systems such as cell phones or laptop computers it is not

clearly defined in the spec how to specify a clamping voltage

at the device level. ON Semiconductor has developed a way

to examine the entire voltage waveform across the ESD

protection diode over the time domain of an ESD pulse in the

form of an oscilloscope screenshot, which can be found on

the datasheets for all ESD protection diodes. For more

information on how ON Semiconductor creates these

screenshots and how to interpret them please refer to

AND8307/D.

Figure 5. 8 X 20 ms Pulse Waveform

100

020406080

t, TIME (ms)

% OF PEAK PULSE CURRENT

PULSE WIDTH (t

) IS DEFINED

AS THAT POINT WHERE THE

PEAK CURRENT DECAY = 8 ms

PEAK VALUE I

RSM

@ 8 ms

HALF VALUE I

RSM

/2 @ 20 ms

P1-P3 P4-P6 P7-P9

SRV05-4MR6T1G

Mfr. #:

Buy SRV05-4MR6T1G

Manufacturer:

ON Semiconductor

Description:

TVS Diodes / ESD Suppressors LOW CAP TSOP-6 SMB SPCL

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

SRV05-4MR6T1G