OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

CAT810LSDI-T3

P1-P3P4-P6P7-P9P10-P11
CAT803, CAT809, CAT810
http://onsemi.com
7
Valid RESET with V
CC
Under 1.0 V
To ensure that the CAT809 RESET pin is in a known state when V
CC
is under 1.0 V, a >10 kW pull−down resistor between
RESET pin and GND is recommended. For the CAT810, a pull−up resistor from RESET pin to V
CC
is needed.
Figure 8. RESET Valid with V
CC
Under 1.0 V Figure 9. RESET Valid with V
CC
Under 1.1 V
CAT809
GND
Power
10 kW
Supply
CAT810
GND
Power
Supply
RESET
V
CC
RESET
10 kW
V
CC
Bi−directional Reset Pin Interfacing
The CAT809/810 can interface with mP/mC bi−directional reset pins by connecting a 4.7 kW resistor in series with the
CAT809/810 reset output and the mP/mC bi−directional reset pin.
Figure 10. Bi−directional Reset Pin Interfacing
CAT809
GND
Power
Supply
BUF
Buffered
RESET
GND
Bi−directional
I/O Pin
mP
(For example:
68HC11)
V
CC
V
CC
4.7 kW
RESET RESET
INPUT
CAT803 Open−Drain RESET Application
The CAT803 features an open−drain RESET output and
therefore needs a pull−up resistor on the output for proper
operation, as shown on Figure 11. An advantage of the
open−drain output includes the ability to “wire AND”
several outputs together to form an inexpensive logic circuit.
It is also possible to have the pull−up resistor connected to
a different supply which can be higher than the CAT803 V
CC
pin. The value of the pull−up resistor is not critical in most
applications, typical values being between 5 kW and 10 kW.
Figure 11. Typical CAT803 Open−Drain
Circuit Configuration
CAT803
GND
Power
Supply
GND
mP
V
CC
V
CC
5 kW
RESET
RESET
INPUT
CAT803, CAT809, CAT810
http://onsemi.com
8
Table 5. ORDERING PART NUMBER
Order Number
Voltage
Top Mark
(Note 4)
Output Reset Package
Quantity
per Reel
(Note 5)
NiPdAu (Note 3) Matte−Tin NiPdAu Matte−Tin
CAT803LSDI−GT3 CAT803LSDI−T3 4.63 V VKA VKL
Open
Drain
LOW SC70−3
3,000
CAT803MSDI−GT3 CAT803MSDI−T3 4.38 V VKA VKL
CAT803JSDI−GT3 CAT803JSDI−T3 4.00 V VKA VKL
CAT803TSDI−GT3 CAT803TSDI−T3 3.08 V VKA VKL
CAT803SSDI−GT3 CAT803SSDI−T3 2.93 V VKA VKL
CAT803RSDI−GT3 CAT803RSDI−T3 2.63 V VKA VKL
CAT803ZSDI−GT3 CAT803ZSDI−T3 2.32 V VKA VKL
CAT803LTBI−GT3 CAT803LTBI−T3 4.63 V VKA VKL
Open
Drain
LOW SOT−23−3
CAT803MTBI−GT3 CAT803MTBI−T3 4.38 V VKA VKL
CAT803JTBI−GT3 CAT803JTBI−T3 4.00 V VKA VKL
CAT803TTBI−GT3 CAT803TTBI−T3 3.08 V VKA VKL
CAT803STBI−GT3 CAT803STBI−T3 2.93 V VKA VKL
CAT803RTBI−GT3 CAT803RTBI−T3 2.63 V VKA VKL
CAT803ZTBI−GT3 CAT803ZTBI−T3 2.32 V VKA VKL
CAT809LSDI−GT3 CAT809LSDI−T3 4.63 V VLA VLD
CMOS /
Push−Pull
LOW SC70−3
3,000
CAT809MSDI−GT3 CAT809MSDI−T3 4.38 V VLA VLD
CAT809JSDI−GT3 CAT809JSDI−T3 4.00 V VLA VLD
CAT809TSDI−GT3 CAT809TSDI−T3 3.08 V VLA VLD
CAT809SSDI−GT3 CAT809SSDI−T3 2.93 V VLA VLD
CAT809RSDI−GT3 CAT809RSDI−T3 2.63 V VLA VLD
CAT809ZSDI−GT3 CAT809ZSDI−T3 2.32 V VLA VLD
CAT809LTBI−GT3 CAT809LTBI−T3 4.63 V VLA VLD
CMOS /
Push−Pull
LOW SOT−23−3
CAT809HTBI−GT3 CAT809HTBI−T3 4.55 V VLA VLD
CAT809MTBI−GT3 CAT809MTBI−T3 4.38 V VLA VLD
CAT809JTBI−GT3 CAT809JTBI−T3 4.00 V VLA VLD
CAT809TTBI−GT3 CAT809TTBI−T3 3.08 V VLA VLD
CAT809STBI−GT3 CAT809STBI−T3 2.93 V VLA VLD
CAT809RTBI−GT3 CAT809RTBI−T3 2.63 V VLA VLD
CAT809ZTBI−GT3 CAT809ZTBI−T3 2.32 V VLA VLD
CAT809VTBI−GT3 CAT809VTBI−T3 1.60 V VLA VLD
3. Not recommended for new designs.
4. Threshold and full part numbers will be provided on box and reel labels as well as all Shipping documents.
5. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
6. For detailed information and a breakdown of device nomenclature and numbering systems, please see the ON Semiconductor Device
Nomenclature document, TND310/D, available at www.onsemi.com
CAT803, CAT809, CAT810
http://onsemi.com
9
Table 5. ORDERING PART NUMBER
Order Number
Quantity
per Reel
(Note 5)
PackageResetOutput
Top Mark
(Note 4)
Voltage
NiPdAu (Note 3)
Quantity
per Reel
(Note 5)
PackageResetOutput
Matte−TinNiPdAu
Voltage
Matte−Tin
CAT810LSDI−GT3 CAT810LSDI−T3 4.63 V VHA VHT
CMOS /
Push−Pull
HIGH SC70−3
3,000
CAT810MSDI−GT3 CAT810MSDI−T3 4.38 V VHA VHT
CAT810JSDI−GT3 CAT810JSDI−T3 4.00 V VHA VHT
CAT810TSDI−GT3 CAT810TSDI−T3 3.08 V VHA VHT
CAT810SSDI−GT3 CAT810SSDI−T3 2.93 V VHA VHT
CAT810RSDI−GT3 CAT810RSDI−T3 2.63 V VHA VHT
CAT810ZSDI−GT3 CAT810ZSDI−T3 2.32 V VHA VHT
CAT810LTBI−GT3 CAT810LTBI−T3 4.63 V VHA VHT
CMOS /
Push−Pull
HIGH SOT−23−3
CAT810MTBI−GT3 CAT810MTBI−T3 4.38 V VHA VHT
CAT810JTBI−GT3 CAT810JTBI−T3 4.00 V VHA VHT
CAT810TTBI−GT3 CAT810TTBI−T3 3.08 V VHA VHT
CAT810STBI−GT3 CAT810STBI−T3 2.93 V VHA VHT
CAT810RTBI−GT3 CAT810RTBI−T3 2.63 V VHA VHT
CAT810ZTBI−GT3 CAT810ZTBI−T3 2.32 V VHA VHT
3. Not recommended for new designs.
4. Threshold and full part numbers will be provided on box and reel labels as well as all Shipping documents.
5. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
6. For detailed information and a breakdown of device nomenclature and numbering systems, please see the ON Semiconductor Device
Nomenclature document, TND310/D, available at www.onsemi.com
P1-P3P4-P6P7-P9P10-P11

CAT810LSDI-T3

Mfr. #:
Buy CAT810LSDI-T3
Manufacturer:
ON Semiconductor
Description:
Supervisory Circuits 4.63V Push-Pull High
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet