OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TM21CP-88P(03)

P1-P3P4-P6P7-P8
197
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
■Features
1.
Supports High-Speed LAN Transmission
Conforms to requirements of TIA/EIA-568B data
wiring standard, meeting transmission performance of
Enhanced Category 5.
Supports Gigabit Ethernet (1000BASE-T) and Fast
Ethernet (100BASE-TX) high-speed LAN transmission.
2. EMI protection (TM21*P-88P)
360° coverage of the engagement area with a metal
shield assures protection against electromagnetic
interference. When mated with corresponding
connector the shield surfaces are securely connected
to provide continuous circuit.
3. Protected latch tab (TM21P-88P)
Flexible case extends over the release tab preventing
the possibility of breaking-off during handling of the
complete cable assembly.
4. Termination of conductors
Self located 24 AWG conductors (solid or stranded)
are terminated against pre-inserted contacts using
simple tooling.
5. Simplified termination (TM21*P-88P)
Removeable one piece cover allows easy access to
the termination areas.
6. Conforms to the ISO 8877 Standard
(ISDN Interface Connector)
TM21P Series (Shielded Type) TM22P-88P (Non-shielded Type)
1
Protected latch tab
Cover Installation Procedure
2
1
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
198
TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
■Product Specification
Rating
Current rating 1A
Voltage rating 125 V AC
Operating temperature range-25
ç
to +60
ç
(Note)
■Materials
Insulator Polycarbonate Color: Clear UL94V-2
Contacts Copper alloy Contact area: Gold plating -------
Shield Copper alloy Tin plating -------
Conductor holding tray Polycarbonate Color: Clear UL94V-2
Cover Polyamide Color: Light beige (Note) UL94V-2
Part Material Finish Remarks
Note :Includes temperature rise caused by current flow.
Item Specification Conditions
1. Insulation resistance 100 M ohms min. 100 V DC
2. Withstanding voltage
No flashover or insulation breakdown 500 V AC / one minute
(between adjacent contacts)
3. Withstanding voltage
No flashover or insulation breakdown 1500 V AC / one minute
(between contact and shield)
4. Contact resistance 230 m ohms max. 100mA DC
5. Vibration
No electrical discontinuity of 5 ms or more
Contact resistance: 250m ohms max.
6. Shock
No electrical discontinuity of 5 ms. min.
Contact resistance: 250m ohms max.
7. Durability
Contact resistance: 250m ohms max. 200
(mating/un-mating)
8. Temperature cycle Contact resistance: 250 m ohms max.
Insulation resistance: 100 M ohms min.
9. Humidity
Contact resistance: 250 m ohms max.
Insulation resistance: 1 M ohms min. (High humidity)
500 hours at temperature of 40ç and humidity of 90% to 95%
Insulation resistance: 10 M ohms min. (Dry state)
10. Salt Spray Contact resistance: 250 m ohms max. Exposed to density 5% salt water for 48 hours
Temperature: -55
ç
/+5
ç
to +35
ç
/+85
ç
/+5
ç
to +35
ç
Duration: 30/5/30/5(Minutes)
5 cycles
Acceleration of 490 m/s
2
, 11 ms duration,
sine half-wave waveform, 3 cycles in each of the 3 axis
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours / 3 axis
Note :Cover available in various colors. Refer to page 3.
■Ordering information
Series name TM21P: Shielded
Cover Type
Blank: Protective latch cover
C: Short cover
Size 8: For 8 contacts
Inserted contacts 8P: 8
1
2
3
4
TM21 C P - 8 8P
1 2 1 3 4
●
Plugs- Shielded
Series name TM22P : Non-shielded
Size 8 : For 8 contacts
Inserted contacts 8P: 8
1
2
3
TM22P - 8 8P
1 32
●
Plugs - Non-shielded
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
199
TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
●
Shielded
■Plug Connectors
Part Number CL No.
TM21P-88P
TM21P-88P
(
02
)
TM21P-88P
(
03
)
TM21P-88P
(
04
)
TM21P-88P
(
05
)
TM21P-88P
(
06
)
TM21P-88P
(
07
)
TM21P-88P
(
08
)
TM21P-88P
(
09
)
Cover Color
Light beige
Medium gray
Black
Natural light gray
Red
Green
Blue
Yellow
Orange
222-2862-9-02
222-2862-9-02
222-2862-9-03
222-2862-9-04
222-2862-9-05
222-2862-9-06
222-2862-9-07
222-2862-9-08
222-2862-9-09
(44.65)(13.4)
(34)
Contact No.8Contact No. 1
29.5
9
16.6
(34)
(R3.5)
6.7
Conductor holding tray
Cover
30.2
12.9
6.6
(0.6)
17.5
6.09
11.7
9.05
5.4
3.45
■Cover installed ■
Mated with corresponding receptacle
(shown for reference only)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
P1-P3P4-P6P7-P8

TM21CP-88P(03)

Mfr. #:
Buy TM21CP-88P(03)
Manufacturer:
Hirose Electric
Description:
Modular Connectors / Ethernet Connectors 8P M MODULAR PLUG EMI PROTECTION T/H
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet