TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
■Cover installed
■Applicable Shielded Cable Specifications
■
Mated with corresponding receptacle
(shown for reference only)
Note: For cable termination procedures refer to:
[
TM21P-88P Cable Termination Procedure Manual
]
(ETA-E2349) and
[
TM21CP-88P Cable termination Procedure Manual
]
(ETA-E2353).
Some cables may not meet the required service ratings. Contact Hirose sales representative for specific cable applications
recommendations.
■Plug Connectors
Note: For other colors contact Hirose sales representative.
Cover
Contact No.8
Contact No.1
Conductor holding tray
30.2
12.9
6.6
(0.6)
17.5
(22.4)
10.4
6.7
9
17.2
(R3.5)
TM21CP-8
TM21CP-8
6.09
11.7
9.05
5.4
3.45
(13.4 )
(32.35)
TM21CP-8
(21.7)
TM21CP-8
Part NumberCL No.
TM21CP-88P
(
03
)
Cover color
Black222-2884-1-03
Specifications
Solid copper conductor: 0.5mm dia.
Stranded copper conductor: AWG#24
(Dia. 0.2mm x 7 pcs)
(
0.9mm to 1.0mm
)
AWG#26 (tin coated)
(dia. 6.6mm)
Conductor
Individual conductor insulation dia.
Drain wire
Overall jacket dia.
●
Shielded-Short Cover
JacketShield
Conductor
Insulation
Drain wire
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
201
TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Specifications
Solid copper conductor: 0.5mm dia.
Stranded copper conductor: AWG#24
(Dia. 0.2mm x 7 pcs)
(
0.9mm to 1.0mm
)
(dia. 5.4mm to 5.7mm)
Conductor
Individual conductor insulation dia.
Overall jacket dia.
Insulation
Jacket
Conductor
■Mated with corresponding receptacle (shown for reference only)
■Applicable Non-shielded Cable Specifications
Note: For cable termination procedures refer to:
[
TM22P-88P Cable Termination Procedure Manual
]
(ETA-E2381).
Some cables may not meet the required service ratings. Contact Hirose sales representative for specific cable applications
recommendations.
Contact No.8Contact No.1
Conductor holding tray
6.6
9.05
3.45
5.4
(0.6)
22.5
6.09
11.7
14.2
7.9
(11.85)
■Plug Connectors
Part NumberCL No.
TM22P-88P222-2899-9
●
Non-shielded
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
202
TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
■Hand termination tools
Part NumberCL No.Applicable connector
HT601 / TM21P-88P902-2133-1
TM21P-88P
TM21CP-88P
●
For contact/conductor termination (For cable and shield crimping)
●
For contact/conductor termination (Non-shielded connectors)
Part NumberCL No.Applicable connector
HT601-TM23/22P-88PCL902-2128-1
TM22P-88P
TM23P-88P
HRS marking side
(For contact/conductor termination)
A
Reverse side
(For cable strain relief clamp crimping)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.