G7TC
G7TC
4
Engineering Data
220 VAC (cosφ 0.4)
AC inductive load (cosφ 0.4)
Example for Output Block
(for Reference)
If a G7T I/O Relay is mounted in every
other position on an Output Block (see
drawing), a resistive load of 10 A (24
VDC) can be switched. Note that the
service life is reduced to 150,000 op-
erations in this case.
Load Current vs. Ambient Temperature
G3TA-OA202SZ
G3TA-OA202SL
G3TA-ODX02S
G3TA-OA201S
Load current (A)
Single relay
16 points mounted
Load current (A)
Single relay
16 points mounted
Ambient temperature (°C) Ambient temperature (°C)
Inrush Current
The following graphs show the maximum inrush currents that can be withstood for non-repetitive operation. For repetitive operation, the figures
should be reduced by half.
G3TA-OA202SZ
G3TA-OA202SL
G3TA-ODX02S G3TA-OD201S
Inrush current (A: Peak)
Energizing time (ms)
Inrush current (A)
Inrush current (A)
Energizing time (ms) Energizing time (ms)
