G7TC-IA16 AC110/120V Datasheet G7TC-IA16 AC110/120V, G7TC-IA16-5 AC100/110 | P7-P9

G7TC

G7TC-OC16

Note: A controller with an NPN transistor, common output can be connected to the G7TC-OC16.

G7T-1112S

G7TC-OC16-1

Note: A controller with a PNP transistor, + common output can be connected to the G7TC-OC16-1. Do not connect the G71 Remote

Interface to the G7TC-OC16-1. Due to the difference in polarity, the G71 will be damaged if the G7TC-OC16-1 and the G71 are

connected to each other. Use the G7TC-OC16 (NPN output/+ common) instead, to connect to the G71.

G7TC

G7TC-OC08 (NPN output/+ common)

Note: A controller with an NPN transistor, – common output can be connected to the G7TC-OC08.

G7T-1112S

–

Connector

pin No.

Output Relay

Screw terminals

Connector Pin Configuration

Top View

Note: 1. Pin numbers are indicated for convenience. The

 mark can be used to determine orientation.

2. The G7TC-OC08 does not have terminals 8 to 15.

(see note 2)

Accessories (Order Separately)

G79 Connecting Cables

G79-YC Connecting Cable with Crimp-type Hooks

This Cable is convenient for connecting I/O Blocks to devices equipped with screw terminals.

Length (ȏ)

Model

1,000 mm G79-Y100C

1,500 mm G79-Y150C

2,000 mm G79-Y200C

3,000 mm G79-Y300C

5,000 mm G79-Y500C

Note: 1. Power line capacity must be within 50 mA per I/O point. Always check driver capacity and I/O relay power consumption when using

an Output Block.

2. Hooks are labeled with corresponding connector pin numbers.

3. Connect terminals 9 and 19 and terminals 10 and 20 together when using the G7TC-OC08.

4. The separate wires at the device end of the Cable each have a diameter of AWG 28 (10/0.38).

To I/O

device

To I/O

Block

G7TC

G79-AC Connecting Cable

This Cable has separate wires at the device end.

Length (ȏ)

Model

2,000 mm G79-A200C

5,000 mm G79-A500C

Note: 1. The separate wires at the device end of the Cable each have a diameter of AWG 24 (7/0.203).

2. Connect terminals 9 and 19 and terminals 10 and 20 together when using the G7TC-OC08.

G79-C Connecting Cable with One Connector

This Cable is convenient for connecting an I/O Block to a single device equipped with one connector socket.

Length (ȏ)

Model

1,000 mm G79-100C

1,500 mm G79-150C

2,000 mm G79-200C

3,000 mm G79-300C

5,000 mm G79-500C

G79-OC- and G79-IC Connecting Cables with Two Connectors

Cables for both Output Blocks (for connection to SYSMAC I/O Units; tape color: red) and Input Blocks (for connection to SYSMAC I/O Units;

tape color: yellow) are available.

Length

Cables for

I t Bl k

Cables for

O t t Bl k

A B

Input Blocks Output Blocks

1,000 mm 750 mm G79-I100C-75 G79-O100C-75

1,500 mm 1,250 mm G79-I150C-125 G79-O150C-125

2,000 mm 1,750 mm G79-I200C-175 G79-O200C-175

3,000 mm 2,750 mm G79-I300C-275 G79-O300C-275

5,000 mm 4,750 mm G79-I500C-475 G79-O500C-475

Note: The 32-point card-type connector for Input Block Cables

and that for Output Block Cables have different pin arrange-

ments.

G79-C-- Connecting Cable with Three Connectors

Length

Model

A B C

1,500 mm 1,250 mm 1,000 mm G79-150C-125-100

2,000 mm 1,750 mm 1,500 mm G79-200C-175-150

3,000 mm 2,750 mm 2,500 mm G79-300C-275-250

To I/O

device

To I/O

Block

The lengths given

are for straight lines

and do not take

bends into account.

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15 P16-P18 P19-P20

G7TC-IA16 AC110/120V

Mfr. #:

Buy G7TC-IA16 AC110/120V

Manufacturer:

Description:

General Purpose Relays RlyBlock 16AC110/120

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

G7TC-IA16 AC110/120V

G7TC-IA16 AC110/120V

Products related to this Datasheet