Swissbit AG Swissbit reserves the right to change products or specifications without notice. Revision: 0.80
Industriestrasse 4
CH-9552 Bronschhofen www.swissbit.com X-200s_fact_sheet_SA-VxBR_Rev080.doc
Switzerland info@swissbit.com Page 2 of 4
X-200s Solid State Drive
Industrial SLIM SATA SSD (MO-297A)
2GByte up to 32GByte
Feature summary
Form factor:
o Jedec MO-297A sized Solid State Drive (SSD)
o 54mm x 39mm x 4mm
Interface:
o SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible)
o 7+15pin (SATA+power)
o standard 2.5” SATA-connector
Highly-integrated memory controller
o max. UDMA6 supported
o max. PIO mode 4, MDMA2 supported
o SLC Nand Flash
o Hardware BCH-code ECC (8 Bit correction per sector for SLC)
o fix drive configuration
Low-power CMOS technology
5V ± 10% power supply
optional 3.3V± 5% power supply
Low Power, less than 500mA
No mechanical noise
Activity LED output (P11) (optional can be NC on the module)
Wear Leveling: active wear leveling of static and dynamic data
The wear leveling assures that dynamic data as well as static data is balanced evenly across the
memory. With that the maximum write endurance of the device is guaranteed.
Write endurance: Due to intelligent wear leveling an even use of the entire flash is guaranteed,
regardless how much “static” (OS) data is stored.
Example: If the average file size is 10MByte and the total capacity is 8GByte, 80Mio write cycles can be
performed.
Data Retention: 10 years @ 10% life time
High reliability
o MTBF > 2,500,000 hours
o Data reliability: < 1 non-recoverable error per 10
14
bits read
High performance
o Up to 300MB/s burst transfer rate in SATA II - 3.0Gb/sec
o Sustained Write performance: up to 90MB/s
o Sustained Read Performance: up to 105MB/s
Available densities
o 4GByte up to 32GByte (SLC NAND Flash)
Temperature ranges
o Commercial Temperature range 0 … +70°C
o Industrial Temperature range -40 … +85°C
Controlled BOM
RoHS compatible
