Swissbit AG Swissbit reserves the right to change products or specifications without notice. Revision: 0.80
Industriestrasse 4
CH-9552 Bronschhofen www.swissbit.com X-200s_fact_sheet_SA-VxBR_Rev080.doc
Switzerland info@swissbit.com Page 4 of 4
Table 1: System Performance
Data transfer Rate (sATA burst)
Sustained Read (max. measured)
Sustained Write (max. measured)
1. All values refer to modules with 4x Toshiba Flash in UDMA mode 5, SATA 3.0Gbit/s, write/read data sequential
256 Sectors/Transfer command.
2. Sustained speed depends on flash type and number, file size, and burst speed
Table 2: Current consumption
(1)
at 5V ± 10%
1. All values are typical at 25° C and nominal supply voltage and refer to 16GByte SSD module.
Table 3: Environmental Specifications
Environmental Specifications
Humidity (non-condensing)
Vibration (peak -to-peak)
1500G, 0.5ms duration, half sine wave
Table 4: Physical Dimensions
Table 5: SSD capacity specification
Total addressable capacity
(Byte)
*) The CHS addressing is limited to about 8GB. Larger drives should be used in LBA mode.
Table 6: System Reliability and Maintenance
< 1 Non-Recoverable Error per 10
14
bits Read
(1) Dependent on final system qualification data.
For more information on MO-297A mechanical standard, please visit JEDEC at www.jedec.org.
For more information on Serial ATA Revision 2.6, please visit Serial ATA International Organization at
www.serialata.org
Why Swissbit?
Swissbit strives to create innovative technologies for future market opportunities utilizing a highly skilled
in-house product research and development team. Swissbit maintains a marketing edge by continuing to
manufacture world-class high quality memory products and providing customers with both high value and
low cost of ownership achieved through efficient processes and procedures.
