OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

71V016SA12YGI

P1-P3P4-P6P7-P9
7
IDT71V016SA, 3.3V CMOS Static RAM
1 Meg (64K x 16-Bit) Commercial and Industrial Temperature Ranges
Timing Waveform of Write Cycle No. 2 (CS Controlled Timing)
(1,4)
NOTES:
1. A write occurs during the overlap of a LOW CS, LOW BHE or BLE, and a LOW WE.
2. OE is continuously HIGH. If during a WE controlled write cycle OE is LOW, tWP must be greater than or equal to tWHZ + tDW to allow the I/O drivers to turn off and data to be placed
on the bus for the required tDW. If OE is HIGH during a WE controlled write cycle, this requirement does not apply and the minimum write pulse is as short as the specified tWP.
3. During this period, I/O pins are in the output state, and input signals must not be applied.
4. If the CS LOW or BHE and BLE LOW transition occurs simultaneously with or after the WE LOW transition, the outputs remain in a high-impedance state.
5. Transition is measured ±200mV from steady state.
Timing Waveform of Write Cycle No. 3 (BHE, BLE Controlled Timing)
(1,4)
ADDRESS
CS
DAT A
IN
3834 drw 09
DATA
IN
VALID
t
WC
t
AS
(2)
t
CW
t
WR
WE
t
AW
DATA
OUT
t
DW
t
DH
BHE, BLE
t
BW
t
WP
ADDRESS
CS
DATA
IN
3834 drw 10
DATA
IN
VALID
t
WC
t
AS
(2)
t
CW
t
WR
WE
t
AW
DATA
OUT
t
DW
t
DH
BHE, BLE
t
BW
t
WP
8
IDT71V016SA, 3.3V CMOS Static RAM
1 Meg (64K x 16-Bit) Commercial and Industrial Temperature Ranges
Ordering Information
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
Datasheet Document History
9
IDT71V016SA, 3.3V CMOS Static RAM
1 Meg (64K x 16-bit) Commercial and Industrial Temperature Ranges
CORPORATE HEADQUARTERS for SALES:
6024 Silver Creek Valley Road 800-345-7015 or
San Jose, CA 95138 408-284-8200
fax: 408-284-2775
www.idt.com
for Tech Support:
sramhelp@idt.com
408-284-4532
01/07/00 Updated to new format
Pg. 1, 3, 5, 8 Added Industrial Temperature range offerings
Pg. 2 Numbered I/Os and address pins on FBGA Top View
Pg. 6 Revised footnotes on Write Cycle No. 1 diagram
Pg. 7 Revised footnotes on Write Cycle No. 2 and No. 3 diagrams
Pg. 9 Added Datasheet Document History
08/30/00 Pg. 3 Tighten ICC and ISB.
Pg. 5 Tighten tCLZ, tCHZ, tOHZ, tBHZ and tWHZ
08/22/01 Pg. 8 Removed footnote "available in 15ns and 20ns only"
06/20/02 Pg. 8 Added tape and reel field to ordering information
01/30/04 Pg. 8 Added "Restricted hazardous substance device" to ordering information.
09/27/06 Pg. 8 Corrected ordering information, changed position of I and G.
02/14/07 Pg.8 Added H step generation to data sheet ordering information.
06/26/07 Pg.3 Changed typical parameters for ICC, DC electrical characteristics table.
10/13/08 Pg.8 Removed "IDT" from orderable part number
10/11/11 Pg.1,8 Updated datasheet with removal of Obsolete HSA part number.
08/13/13 Pg.1,3,5,8 Added 10ns for Industrial Temperature range offerings.
P1-P3P4-P6P7-P9

71V016SA12YGI

Mfr. #:
Buy 71V016SA12YGI
Manufacturer:
IDT
Description:
SRAM 64Kx16 ASYNCHRONOUS 3.3V STATIC RAM
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet