LPC2290_3 © NXP B.V. 2006. All rights reserved.
Product data sheet Rev. 03 — 16 November 2006 10 of 41
NXP Semiconductors
LPC2290
16/32-bit ARM microcontroller with external memory interface
P2.18/D18 133
[5]
I/O P2.18 — General purpose digital input/output pin.
I/O D18 — External memory data line 18.
P2.19/D19 134
[5]
I/O P2.19 — General purpose digital input/output pin.
I/O D19 — External memory data line 19.
P2.20/D20 136
[5]
I/O P2.20 — General purpose digital input/output pin.
I/O D20 — External memory data line 20.
P2.21/D21 137
[5]
I/O P2.21 — General purpose digital input/output pin.
I/O D21 — External memory data line 21.
P2.22/D22 1
[5]
I/O P2.22 — General purpose digital input/output pin.
I/O D22 — External memory data line 22.
P2.23/D23 10
[5]
I/O P2.23 — General purpose digital input/output pin.
I/O D23 — External memory data line 23.
P2.24/D24 11
[5]
I/O P2.24 — General purpose digital input/output pin.
I/O D24 — External memory data line 24.
P2.25/D25 12
[5]
I/O P2.25 — General purpose digital input/output pin.
I/O D25 — External memory data line 25.
P2.26/D26/
BOOT0
13
[5]
I/O P2.26 — General purpose digital input/output pin.
I/O D26 — External memory data line 26.
I BOOT0 — While
RESET is low, together with BOOT1 controls booting and
internal operation. Internal pull-up ensures high state if pin is left
unconnected.
P2.27/D27/
BOOT1
16
[5]
I/O P2.27 — General purpose digital input/output pin.
I/O D27 — External memory data line 27.
I BOOT1 — While
RESET is low, together with BOOT0 controls booting and
internal operation. Internal pull-up ensures high state if pin is left
unconnected.
BOOT1:0 = 00 selects 8-bit memory on CS0 for boot.
BOOT1:0 = 01 selects 16-bit memory on CS0 for boot.
BOOT1:0 = 10 selects 32-bit memory on CS0 for boot.
BOOT1:0 = 11 selects internal flash memory.
P2.28/D28 17
[5]
I/O P2.28 — General purpose digital input/output pin.
I/O D28 — External memory data line 28.
P2.29/D29 18
[5]
I/O P2.29 — General purpose digital input/output pin.
I/O D29 — External memory data line 29.
P2.30/D30/
AIN4
19
[2]
I/O P2.30 — General purpose digital input/output pin.
I/O D30 — External memory data line 30.
I AIN4 — ADC, input 4. This analog input is always connected to its pin.
P2.31/D31/
AIN5
20
[2]
I/O P2.31 — General purpose digital input/output pin.
I/O D31 — External memory data line 31.
I AIN5 — ADC, input 5. This analog input is always connected to its pin.
P3.0 to P3.31 I/O Port 3 — Port 3 is a 32-bit bidirectional I/O port with individual direction
controls for each bit. The operation of port 3 pins depends upon the pin
function selected via the Pin Connect Block.
Table 3. Pin description
…continued
Symbol Pin Type Description