1. General description
The 74AUP1Z04 combines the functions of the 74AUP1GU04 and 74AUP1G04 with
enable circuitry and an internal bias resistor to provide a device optimized for use in
crystal oscillator applications.
When not in use the EN
input can be driven HIGH, putting the device in a low power
disable mode with X1 pulled HIGH via R
PU
, X2 set LOW and Y set HIGH.Schmitt trigger
action at the EN
input makes the circuit tolerant to slower input rise and fall times across
the entire V
CC
range from 0.8 V to 3.6 V.
This device is fully specified for partial power-down applications using I
OFF
at output Y.
The I
OFF
circuitry disables the output Y, preventing the damaging backflow current through
the device when it is powered down.
The integration of the two devices into the 74AUP1Z04 produces the benefits of a
compact footprint, lower power dissipation and stable operation over a wide range of
frequency and temperature.
2. Features and benefits
Wide supply voltage range from 0.8 V to 3.6 V
High noise immunity
ESD protection:
HBM JESD22-A114F Class 3A exceeds 5000 V
MM JESD22-A115-A exceeds 200 V
CDM JESD22-C101E exceeds 1000 V
Latch-up performance exceeds 100 mA per JESD78B Class II
Inputs accept voltages up to 3.6 V
Low noise overshoot and undershoot < 10 % of V
CC
I
OFF
circuitry provides partial Power-down mode operation at output Y
Multiple package options
Specified from 40 Cto+85C and 40 Cto+125C
74AUP1Z04
Low-power X-tal driver with enable and internal resistor
Rev. 5 — 9 August 2012 Product data sheet