©
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
4
Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in
brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners.
Electro-Optic Packaged Components (Continued)
PDF Datasheet 1654551
Revised 6-03
Only available as PDF at:
http://www.amp.com/fiberoptics/documents/1654551.pdf
“NEW” 1310nm Fabry-Perot Lasers (TO-56) (Continued)
Product Facts
1310nm typical
emission wavelength
Low threshold, low
operating current
High-power, wide
temperature range
operation
High reliability, long
operational life
Available in two pin-out
configurations
Part Numbers
1382585-2 (Case Anode)
1382676-2 (Common Anode)
Tyco Electronics’ TO-56 Laser
is an InGaAsP/InP-based Strained
Multi-Quantum Well (SMQW)
device that provides stable, single
transverse mode oscillation with
emission wavelength of 1310nm.
The Laser packages are
uncooled, hermetically sealed
for high reliability and incorporate
a photodiode for monitoring
optical output.
Absolute Maximum Ratings
Symbol Parameter Conditions Ratings Unit
Po Light output power - 8 mW
V
RL
Reverse Voltage (Laser diode) - 2 V
V
RD
Reverse Voltage (Photodiode) - 20 V
I
FD
Forward current (Photodiode) - 2 mA
T
C
Case Temperature - -40 to +85 °C
T
stg
Storage Temperature - -40 to +85 °C
Electrical/Optical Characteristics
Symbol Parameter
Limits
Unit
Min Typ. Max.
Optical λc Center Wavelength (25 °C) 1280 - 1320 nm
Spectrum λct Center Wavelength (-40°C to +85°C) 1260 - 1350 nm
∆λ Spectral Width @ Po = 4mW(-40°C to +85°C) - 1 3.0 nm
λc
T
Wavelength temperature coefficient - 0.4 0.5 nm/°C
Light- I
th
Threshold current @ 25°C - 6 10 mA
Current I
thOT
Threshold current over temperature (-40°C to +85°C) 1 40 mA
Curve V
F
Forward Voltage - 1.2 2.0 V
η Slope Efficiency @ 25°C I
th
+10 mA 0.2 0.26 0.4 mW/mA
I
DR
Drive current above I
th
for 5 mW (-40°C to +85°C) 9 - 25 mA
P
th
Optical Power @ I
th
-3 mA - - 20 µW
Modulation t
r,
t
f
Rise & Fall Times - - 0.2 ns
Far Field θ
//
Beam Divergence (Parallel) - 18 40 Deg
θ
Beam Divergence (Perpendicular) - 26 40 Deg
Monitor I
m
Current @ 5 mW (-40°C to +85°C) 0.3 - 0.7 mA
Diode I
d
Dark current (25°C,V
RD
= 5V) - 0.01 0.1 µA
C
D
Capacitance (V
RD
= 5V, ƒ = 1MHz) - 1.2 20 PF
TO-56 Laser
High Speed Device
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
5
©
Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in
brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners.
Electro-Optic Packaged Components (Continued)
PDF Datasheet 1654551
Revised 6-03
Only available as PDF at:
http://www.amp.com/fiberoptics/documents/1654551.pdf
“NEW” Singlemode Receptacle Transmitters
Product Facts
156 Mb/s data rates
1310nm typical
emission wavelength
Low threshold, low
operating current
Singlemode fiber stub with
split sleeve
Wide temperature range
operation
High reliability, long
operational life
Telecordia GR-468 qualified
Part Numbers
1382459-1 (Case Anode - 0 to -5 dBm)
1382459-2 (Common Anode - 0 to -5 dBm)
1382461-1 (Case Anode - -8 to -14 dBm)
1382461-2 (Common Anode - -8 to -14 dBm)
SC Receptacle Transmitter
Optical Subassembly
Low Speed
Tyco Electronics’ SC Receptacle
Transmitter Optical Subassembly
(OSA), with InGaAsP/InP-based
Strained Multi-Quantum Well
(SMQW) device, provides stable,
single transverse mode oscillation
with emission wavelength of
1310nm.
The OSAs are uncooled,
hermetically sealed for high
reliability and incorporate a
photodiode for monitoring
optical output.
Absolute Maximum Ratings - 1382459-1, -2
Symbol Parameter Conditions
Limits
Unit
Min Max
I
f
Laser Forward Current DC - 150 mA
I
r
Laser Reverse Current DC - 100 uA
V
RL
Reverse Voltage (Laser diode) DC - 2 V
V
RD
Reverse Voltage (Photodiode) DC - 20 V
I
FD
Forward current (Photodiode) - - 2 mA
T
C
Operating Case Temperature - 0 +70 °C
T
stg
Storage Temperature - -40 +85 °C
Electrical/Optical Characteristics - 1382459-1, -2
Symbol Parameter Test Condition
Limits
Unit
Min Typ. Max.
Optical P
o
Optical Output Power (CW) Reference Grade -5 - 0 dB
Spectrum Cable Tc=0°C to +70°C
0.312 1.0 µW
λ
c
Central Wavelength Tc=25°C 1290 - 1315 nm
Tc=0°C to +70°C 1280 1335
∆λ Spectral Width One Sigma, RMS - 1 2.5 nm
(0°C to +70°C)
λ
cT
Wavelength temperature - 0.4 0.5 nm/ °C
coefficient
Light- I
th
Threshold current Tc=25°C 3 6 10 mA
Current
Tc=0°C to +70°C 1.5 25 mA
Curve
V
F
Forward Voltage - 1.2 2.0 V
η Slope Efficiency Tc=25°C 32 48 60 uW/mA
I
d
Drive Current above I
th
Tc=25°C 17 - 32 mA
@Po
MAX
(CW)
Tc=0°C to +70°C 17 - 40 mA
P
th
Coupled Power in "off" state I = I
th
- 2mA - - 12 µW
Modulation t
r,
t
f
Rise & Fall Times 20% - 80% - 1.5 ns
Monitor I
m
Monitor Output current Tc=0°C to +70°C 0.5 - 1.3 mA
@ Po
MAX
Diode Dark current, Photodiode V
RD
= 5V - 0.01 0.1 mA
Tc=0°C to +70°C
C
D
Capacitance, Photodiode V
RD
= 5V, 1MHz - 1.2 20 pF
Tc=0°C to +70°C
R Tracking Error @ Po
MAX
Tc=0°C to +70°C ±1.0 dB
©
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
6
Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in
brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners.
Electro-Optic Packaged Components (Continued)
PDF Datasheet 1654551
Revised 6-03
Only available as PDF at:
http://www.amp.com/fiberoptics/documents/1654551.pdf
“NEW” Singlemode Receptacle Transmitters (Continued)
Absolute Maximum Ratings - 1382461-1, -2
Symbol Parameter Conditions
Limits
Unit
Min Max
I
f
Laser Forward Current DC - 150 mA
I
r
Laser Reverse Current DC - 100 uA
V
RL
Reverse Voltage (Laser diode) DC - 2 V
V
RD
Reverse Voltage (Photodiode) DC - 20 V
I
FD
Forward current (Photodiode) - - 2 mA
T
C
Operating Case Temperature - -40 +85 °C
T
stg
Storage Temperature - -40 +85 °C
Electrical/Optical Characteristics - 1382461-1, -2
Symbol Parameter Test Condition
Limits
Unit
Min Typ. Max.
Optical P
o
Optical Output Power (CW) Reference Grade -14 - -8 dB
Spectrum Cable Tc=-40°C to +85°C
39 158 µW
λ
c
Central Wavelength Tc=25°C 1290 - 1333 nm
Tc=-40°C to +85°C 1261 1360
∆λ Spectral Width One Sigma, RMS - 1 2.5 nm
(-40°C to +85°C)
λ
cT
Wavelength temperature - 0.4 0.5 nm/ °C
coefficient
Light- I
th
Threshold current Tc=25°C 3 6 10 mA
Current
Tc=-40°C to +85°C 1.5 32 mA
Curve
V
F
Forward Voltage - 1.2 2.0 V
η Slope Efficiency Tc=25°C 18 - 30 uW/mA
I
d
Drive Current above I
th
Tc=25°C 5 - 9 mA
@Po
MAX
(CW)
Tc=-40°C to +85°C 4 - 13 mA
P
th
Coupled Power in "off" state I = I
th
- 2mA - - 12 µW
Modulation t
r,
t
f
Rise & Fall Times 20% - 80% - 1.5 ns
Monitor I
m
Monitor Output current Tc=-40°C to +85°C 0.2 - 0.45 mA
@ Po
MAX
Diode Dark current, Photodiode V
RD
= 5V - 0.01 0.1 mA
Tc=-40°C to +85°C
C
D
Capacitance, Photodiode V
RD
= 5V, 1MHz - 1.2 20 pF
Tc=-40°C to +85°C
R Tracking Error @ Po
MAX
Tc=-40°C to +85°C ±1.5 dB
SC Receptacle Transmitter
Optical Subassembly
Low Speed
(Continued)
Part Numbers
1382459-1 (Case Anode - 0 to -5 dBm)
1382459-2 (Common Anode - 0 to -5 dBm)
1382461-1 (Case Anode - -8 to -14 dBm)
1382461-2 (Common Anode - -8 to -14 dBm)

259012-1

Mfr. #:
Manufacturer:
TE Connectivity / AMP Connectors
Description:
Fiber Optic Connectors LED 1.3UM 2.5MM
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet