For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
7
©
Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in
brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners.
Electro-Optic Packaged Components (Continued)
PDF Datasheet 1654551
Revised 6-03
Only available as PDF at:
http://www.amp.com/fiberoptics/documents/1654551.pdf
“NEW” Singlemode Receptacle Transmitters (Continued)
Product Facts
Data rates up to 3.125 Gb/s
1310nm typical
emission wavelength
Low threshold, low
operating current
Singlemode fiber stub with
split sleeve
Wide temperature range
operation
High reliability, long
operational life
Telecordia GR-468 qualified
Part Numbers
1382462-1 (Case Anode)
1382462-2 (Common Anode)
SC Receptacle Transmitter
Optical Subassembly
High Speed
Tyco Electronics’ SC Receptacle
Transmitter Optical Subassembly
(OSA), with InGaAsP/InP-based
Strained Multi-Quantum Well
(SMQW) device, provides stable,
single transverse mode oscillation
with emission wavelength of
1310nm.
The OSAs are uncooled,
hermetically sealed for high
reliability and incorporate a
photodiode for monitoring
optical output.
Absolute Maximum Ratings
Symbol Parameter Conditions
Limits
Unit
Min Max
I
f
Laser Forward Current DC - 150 mA
I
r
Laser Reverse Current DC - 100 uA
V
RL
Reverse Voltage (Laser diode) DC - 2 V
V
RD
Reverse Voltage (Photodiode) DC - 20 V
I
FD
Forward current (Photodiode) - - 2 mA
T
C
Operating Case Temperature - -40 +85 °C
T
stg
Storage Temperature - -40 +85 °C
Electrical/Optical Characteristics
Symbol Parameter Test Condition
Limits
Unit
Min Typ. Max.
Optical P
o
Optical Output Power (CW) Reference Grade -14 - -8 dB
Spectrum Cable Tc=-40°C to +85°C
39 158 µW
λ
c
Central Wavelength Tc=25°C 1303 - 1329 nm
Tc=-40°C to +85°C 1274 1356
∆λ Spectral Width One Sigma, RMS - 1 2.5 nm
(-40°C to +85°C)
λ
cT
Wavelength temperature - 0.4 0.5 nm/ °C
coefficient
Light- I
th
Threshold current Tc=25°C 3 6 10 mA
Current
Tc=-40°C to +85°C 1.5 32 mA
Curve
V
F
Forward Voltage - 1.2 2.0 V
η Slope Efficiency Tc=25°C 18 - 30 uW/mA
I
d
Drive Current above I
th
Tc=25°C 5 - 9 mA
@Po
MAX
(CW)
Tc=-40°C to +85°C 4 - 13 mA
P
th
Coupled Power in "off" state I = I
th
- 2mA - - 12 µW
Modulation t
r,
t
f
Rise & Fall Times 20% - 80% - 1.5 ns
Monitor I
m
Monitor Output current Tc=-40°C to +85°C 0.1 - 0.6 mA
@ Po
MAX
Diode Dark current, Photodiode V
RD
= 5V - 0.01 0.1 mA
Tc=-40°C to +85°C
C
D
Capacitance, Photodiode V
RD
= 5V, 1MHz - 1.2 20 pF
Tc=-40°C to +85°C
R Tracking Error @ Po
MAX
Tc=-40°C to +85°C ±1.5 dB
©
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
8
Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in
brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners.
Electro-Optic Packaged Components (Continued)
PDF Datasheet 1654551
Revised 6-03
Only available as PDF at:
http://www.amp.com/fiberoptics/documents/1654551.pdf
“NEW” Singlemode Receptacle Transmitters (Continued)
Product Facts
Data rates up to 3.125 Gb/s
1310nm typical
emission wavelength
Low threshold, low
operating current
Singlemode fiber stub with
split sleeve
Wide temperature range
operation
High reliability, long
operational life
Telecordia GR-468 qualified
Part Numbers
1382482-1 (Case Anode)
1382482-2 (Common Anode)
LC Receptacle Transmitter
Optical Subassembly
High Speed
Tyco Electronics’ SC Receptacle
Transmitter Optical Subassembly
(OSA), with InGaAsP/InP-based
Strained Multi-Quantum Well
(SMQW) device, provides stable,
single transverse mode oscillation
with emission wavelength of
1310nm.
The OSAs are uncooled,
hermetically sealed for high
reliability and incorporate a
photodiode for monitoring
optical output.
Absolute Maximum Ratings
Symbol Parameter Conditions
Limits
Unit
Min Max
I
f
Laser Forward Current DC - 150 mA
I
r
Laser Reverse Current DC - 100 uA
V
RL
Reverse Voltage (Laser diode) DC - 2 V
V
RD
Reverse Voltage (Photodiode) DC - 20 V
I
FD
Forward current (Photodiode) - - 2 mA
T
C
Operating Case Temperature - -40 +85 °C
T
stg
Storage Temperature - -40 +85 °C
Electrical/Optical Characteristics
Symbol Parameter Test Condition
Limits
Unit
Min Typ. Max.
Optical P
o
Optical Output Power (CW) Reference Grade -10 - -3 dB
Spectrum Cable Tc=-40°C to +85°C
100 500 µW
λ
c
Central Wavelength Tc=25°C 1295 - 1333 nm
Tc=-40°C to +85°C 1266 1360
∆λ Spectral Width One Sigma, RMS - 1 2.5 nm
(-40°C to +85°C)
λ
cT
Wavelength temperature - 0.4 0.5 nm/ °C
coefficient
Light- I
th
Threshold current Tc=25°C 3 6 10 mA
Current
Tc=-40°C to +85°C 1.5 32 mA
Curve
V
F
Forward Voltage - 1.2 2.0 V
η Slope Efficiency Tc=25°C 30 - 50 uW/mA
I
d
Drive Current above I
th
Tc=25°C 10 - 16 mA
@Po
MAX
(CW)
Tc=-40°C to +85°C 9 - 24 mA
P
th
Coupled Power in "off" state I = I
th
- 2mA - - 12 µW
Modulation t
r,
t
f
Rise & Fall Times 20% - 80% - 0.2 ns
Monitor I
m
Monitor Output current Tc=-40°C to +85°C 0.3 0.5 0.7 mA
@ Po
MAX
Diode Dark current, Photodiode V
RD
= 5V - 0.01 0.1 mA
Tc=-40°C to +85°C
C
D
Capacitance, Photodiode V
RD
= 5V, 1MHz - 1.2 20 pF
Tc=-40°C to +85°C
R Tracking Error @ Po
MAX
Tc=-40°C to +85°C ±1.5 dB
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
9
©
Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in
brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners.
Electro-Optic Packaged Components (Continued)
PDF Datasheet 1654551
Revised 6-03
Only available as PDF at:
http://www.amp.com/fiberoptics/documents/1654551.pdf
“NEW” Singlemode Receptacle Receivers
Product Facts
Low Cost
InGaAs/InP PIN Photodiode
with transimpedance amplifier
High sensitivity with automatic
gain control
Differential ended operation
LC interface
Part Numbers
1382649-1 (High Reflectance)
1382650-1 (Low Reflectance)
1.25 Gb/s to 2.5 Gb/s Receiver
Tyco Electronics’ Receivers
1382649-1 and 1382650-1 are
low cost LC connectorized
metal ADM assemblies, suitable
for short and intermediate reach
applications. These receivers
incorporate a highly reliable
MOCVD InP PIN photodiode and
TIA. This design operates at 3.3V
and is suitable for transceiver
applications.
Normal static precautions should
be taken with handling these
components to prevent ESD
damage or degradation.
Absolute Maximum Ratings
Parameter Symbol Specification Units
Operating Temperature T
OP
-40 to +85 °C
Storage Temperature T
STG
-40 to +85 °C
Electrical/Optical Characteristics
Parameter Symbol Spec Min Typical Spec Max Units Conditions
Differential Gain G 5 6.7 8 mV/uW 250kHz, 25°C
@ -10dBm
Bandwidth, -40°C to +85°C f
C
1.8 GHz
Bandwidth, +25°C f
C
2.1 GHz
Sensitivity @ 1.25GHz P
LOW
-19 dBm 2
23
-1 PBRS,
-40°C to +85°C BER 10
-10
Sensitivity @ 1.25GHz P
LOW
-26 dBm 2
23
-1 PBRS,
+25°C BER 10
-10
Sensitivity @ 2.5GHz P
LOW
-18 dBm 2
23
-1 PBRS,
-40°C to +85°C BER 10
-10
Sensitivity @ 2.5GHz P
LOW
-21 dBm 2
23
-1 PBRS,
+25°C BER 10
-10
Max Optical Input Power P
HIGH
0 dBm
Reflectance, 1382649-1 R
ref
-14 dB
(HR)
Reflectance, 1382650-1 R
ref
-30 dB
(LR)
Power Supply Current I
DD
50 mA -40°C to +85°C

259012-1

Mfr. #:
Manufacturer:
TE Connectivity / AMP Connectors
Description:
Fiber Optic Connectors LED 1.3UM 2.5MM
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet