MCS 0402 HP, MCT 0603 HP, MCU 0805 HP
www.vishay.com
Vishay Beyschlag
Revision: 28-Nov-17
1
Document Number: 28916
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Power Thin Film Chip Resistors
Automotive grade high power MC HP thin film chip resistors
are the perfect choice for most fields of modern electronics
where high power dissipation, reliability and stability is of
major concern. The permissible power rating is specified
with up to 400 mW and allows replacement of larger case
sizes with next smaller ones. Typical applications include
power electronics in automotive and industrial appliances.
FEATURES
• Operating temperature up to 175 °C
• Rated dissipation up to 0.4 W for size 0805
• AEC-Q200 qualified
• Superior temperature cycling robustness
• Advanced sulfur resistance verified
according to ASTM B 809
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Automotive
• Industrial
• High power and high temperature applications
• Replacement for larger case sizes
Note
(1)
Please refer to APPLICATION INFORMATION below
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted
film temperature is not exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime.
TECHNICAL SPECIFICATIONS
DESCRIPTION MCS 0402 HP MCT 0603 HP MCU 0805 HP
Imperial size 0402 0603 0805
Metric size code RR1005M RR1608M RR2012M
Resistance range 47 to 100 k 1 to 100 k 1 to 100 k
Resistance tolerance ± 1 %; ± 0.5 %; ± 0.1 %
Temperature coefficient ± 50 ppm/K; ± 25 ppm/K
Rated dissipation P
85
(1)
0.200 W 0.250 W 0.400 W
Operating voltage, U
max.
AC
RMS
/DC 50 V 75 V 150 V
Permissible film temperature,
F max.
(1)
175 °C
Operating temperature range -55 °C to 175 °C