Freescale Semiconductor
User Guide
Rev. 0, 10/2008
Contents
© Freescale Semiconductor, Inc., 2008. All rights reserved.
The M5253 demo board is based on the Freescale V2
architecture family chip, the MCF5253. This board is
shipped with the MCF5253 populated to show the
functionality of this family.
This board is designed as a validation platform with the
maximum flexibility. It serves as a complete
microcomputer system for reference design,
development/evaluation, training, and educational use.
Further more, the board also includes an ethernet
controller on the system FlexBus for debugging and
developing purposes.
1 Demo Board Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.2 Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Top-Level Memory Map. . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 Hardware Submodules . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.1 Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.2 Resets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.3 System Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.4 Booting and Programming the Flash/EEPROM Mem-
ory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.5 SDRAM Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.6 BDM Interfaces — Processor . . . . . . . . . . . . . . . . . 6
3.7 USB 2.0 OTG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.8 FEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.9 ATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.10 Interrupts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.11 Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.12 I2C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.13 QSPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.14 RS232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.15 SD Card Interface . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.16 Audio Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.17 AD Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.18 CAN Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.19 Power Regulation . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.20 Boot Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.21 Serial connector. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.22 Parallel connector . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.23 Jumpers and Headers .................................................12
M5253 Demo Board User Manual
For M5253 Demo Evaulation/Application Development
by: Shen Li
System Engineer, Shanghai
M5253 Demo Board User Manual, Rev. 0
Demo Board Overview
Freescale Semiconductor2
1 Demo Board Overview
1.1 Features
Here is a list of the demo board features. The MCF5253’s external interfaces are:
Synchronous serial interface (SSI) connected to the audio codec WM8731
USB support
Stand-alone USB host controller, support-enhanced host-controller interface (EHCI)
USB device mode
USB on-the-go mode including host capability
Supports high-speed (480 Mbps), full-speed (12 Mbps), and low-speed host (1.5Mbps) operations
Supports internal PHY (with UTMI+ interface)
Crystal/clock
On-board BDM
TM
ATA interface
MMC/SD interface
•Two I
2
Cs
Four QSPIs
Two CANs
Three UARTs
Six 12-bit resolution ADs
FlexBus with 10/100 ethernet controller
•Timers
External interrupts
Memory Subsystems:
16-bit width SDRAM
•2 × 64 KB SRAM
8 k on-chip BootROM
Flash device for boot code development
Power:
Inputs:
5 V (Input to the voltage regulator circuitry)
Regulated on-board voltages:
5 V for USB-VBUS support
3.3 V — I/O Voltage
1.2 V — CPU-core voltage
Top-Level Memory Map
M5253 Demo Board User Manual, Rev. 0
Freescale Semiconductor 3
1.2 Block Diagram
Figure 1. M5253 Demo Board Block Diagram
2 Top-Level Memory Map
The top-level memory map for the M5253 demo board is shown below. This is best for understanding how
the entire memory map of the board is set up.
Table 1. Top-Level Memory Map
Function Start Address End Address Size
SDRAM 0x0000_0000 0x00FF_FFFF
16 MB
SIM MBAR 0x1000_0000 0x1000_0058
96B
Internal SRAM0 0x2000_0000 0x2000_FFFF
64KB
Internal SRAM1 0x2001_0000 0x2001_FFFF
64KB
SIM MBAR2 0x8000_0000 0x8000_01FF
512B
Ethernet Controller
DM9000 (CS1)
0xE000_0300 0xE000_03FF
64B
FLASH (CS0) 0xFF80_0000 0xFFFF_FFFF
8MB

M5253DEMO

Mfr. #:
Manufacturer:
NXP / Freescale
Description:
Development Boards & Kits - COLDFIRE MCF5253DEMO BOARD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet