MIXERS - SUB-HARMONIC - SMT
8
8 - 26
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Pin Number Function Description Interface Schematic
1, 2 N/C
This pin may be connected to the housing
ground or left unconnected.
3Vdd
Power supply for the LO Ampli er. An external RF bypass capacitor
of 100 - 330 pF is required as close to the package as possible.
4RF
This pin is AC coupled an matched to
50 Ohm from 20 - 30 GHz.
5IF
This pin is DC coupled and should be DC blocked externally using
a series capacitor whose value has been chosen to pass the neces-
sary IF frequency range. Any applied DC voltage to this pin will
result in die non-function and possible die failure.
6LO
This pin is AC coupled and matched to
50 Ohm from 10 - 15 GHz.
7 GND Must be soldered to PCB RF ground.
Outline Drawing
Pin Descriptions
NOTES:
1. MATERIAL: PLASTIC
2. PLATING: GOLD OVER NICKEL
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. ALL TOLERANCES ARE ± 0.005 [± 0.13].
5. ALL GROUNDS MUST BE SOLDERED TO PCB RF GROUND.
6.
•
INDICATES PIN 1
HMC264LM3
GaAs MMIC SUB-HARMONIC
SMT MIXER, 20 - 30 GHz
v01.1201
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D