NCS37005
http://onsemi.com
4
Table 3. ABSOLUTE MAXIMUM RATINGS
Rating Symbol Value Unit
Supply Voltage Range Vs 6.0 to 19 V V
Input Voltage Range (Note 1) V
in
−0.3 to 6.0 V
Output Voltage Range V
out
−0.3 to 6.0 V or (V
in
+ 0.3),
whichever is lower
V
Maximum Junction Temperature T
J(max)
140 °C
Storage Temperature Range TSTG −65 to 150 °C
ESD Capability, Human Body Model (Note 2) ESDHBM 2 kV
ESD Capability, Machine Model (Note 2) ESDMM 200 V
Lead Temperature Soldering
Reflow (SMD Styles Only), Pb−Free Versions (Note 3)
T
SLD
260 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area.
2. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per AEC−Q100−002 (EIA/JESD22−A114)
ESD Machine Model tested per AEC−Q100−003 (EIA/JESD22−A115)
Latchup Current Maximum Rating: v150 mA per JEDEC standard: JESD78
3. For information, please refer to our Soldering and Mounting Techniques Reference Manual, SOLDERRM/D
Table 4. THERMAL CHARACTERISTICS
Rating Symbol Value Unit
Thermal Characteristics, QFN16, 3x3.3 mm (Note 4)
Thermal Resistance, Junction−to−Air (Note 5)
Thermal Reference, Junction−to−Lead2 (Note 5)
R
θJA
R
ψJL
64
°C/W
Thermal Characteristics, TSOP−5 (Note 4)
Thermal Resistance, Junction−to−Air (Note 5)
R
θJA
°C/W
4. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area.
5. Values based on copper area of 645 mm
2
(or 1 in
2
) of 1 oz copper thickness and FR4 PCB substrate.
Table 5. OPERATING RANGES (Note 6)
Parameter Conditions Min Typ Max Units
Operating Temperature −40 85 C
IDD 2 mA
SCR Trigger Current 8 mA
SCR Trigger output voltage With 5 V supply 4.5 5 V
Fault Current Sensitivity Ground Fault with ±1% resistor for RctresD 4.5 5 5.5 mA
Ground Fault Response Time 5−20 mA 150 ms
Ground Fault Response Time 20−100 mA 75 ms
Ground Fault Response Time >100 mA 25 ms
CT Turns Ratio 100 300
Internal Oscillator Frequency 2 MHz
CT Driver Closed Loop BW 500 KHz
6. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area.