15
ATAB542x-x-WB [USER GUIDE]
5219C–WIRE–05/15
1.3.6.5 PWR LVL
Sets power output LO ~ 0dBm, HI ~ 8dBm)
P - accesses menu items
L - goes to SYSTEM SET-UP
U,D - scrolls through menu (PWR DWN, CHANNEL ADJUST…)
P LO - sets power output
P, L - sets value and goes to SYSTEM SET-UP
U - selects P HI
D - selects P LO
1.3.6.6 LCD SEG ON
Displays all segments in LCD
P - accesses menu items
L - goes to SYSTEM SET-UP
U,D - scrolls through menu (PWR DWN, CHANNEL ADJUST…)
P - turns all segments on simultaneously, then erases the LCD and turns all segements on sequentially (all segments
on)
P, L, R, U, D - goes to SYSTEM SET-UP.
1.3.6.7 A/D TST
Shows that the A/D converter works
P - accesses menu items
L - goes to SYSTEM SET-UP
U,D - scrolls through menu (PWR DWN, CHANNEL ADJUST…)
RSSI 0 - the RSSI output is on A/D channel 0
P - displays the hex value out of the A/D converter RSSI 0, 4-digit hex number
P - goes to RSSI 0
L,R,U,D - goes to SYSTEM SET-UP
L - goes to SYSTEM SETUP
U,D - scrolls through menus (TEMP 1, LGHT 2, VCC 3)
TEMP 1 - the temperature sensor output is on A/D channel 1
P - displays the hex value out of the A/D converter
TEMP 1, 4-digit hex number
P - goes to TEMP 1
L,R,U,D - goes to SYSTEM SET-UP
L,R,U,D - goes to SYSTEM SET-UP
P - goes to TEMP 1
LGHT 2 - the light sensor output is on A/D channel 2
P - displays the hex value out of the A/D converter
LGHT 2, 4-digit hex number
P - goes to LGHT 2
L,R,U,D - goes to SYSTEM SET-UP
L,R,U,D - goes to SYSTEM SETUP
P - goes to LGHT 2