ATAB542x-x-WB [USER GUIDE]
5219C–WIRE–05/15
16
VCC 3 - the voltage source output is on A/D channel 3
P - displays the hex value out of the A/D converter
VCC 3, 4-digit hex number
P - goes to VCC 3
L,R,U,D - goes to SYSTEM SET-UP
L,R,U,D - goes to SYSTEM SETUP
P - goes to VCC 3
1.3.6.8 CLK OUT
Outputs a square wave on JTAG-header pin #5
P - activates output
L - goes to SYSTEM SET-UP
U,D - scrolls through menu (PWR DWN, CHANNEL ADJUST…)
Note: This square wave is 10 CPU-cycles high, then 10 CPU-cycles low, repeating.
CLK OUT and AVR
®
logo - indicates output is activated
P,L,R,U,D - deactivates clock output and goes to SYSTEM SETUP
1.3.6.9 TIME
Displays day/date/time information
P - displays information
L - goes to SYSTEM SET-UP
U,D - scrolls through menu (PWR DWN, CHANNEL ADJUST…)
P,L,R,U,D - goes to SYSTEM SETUP