Spec. No. JEFL243B – 0003F-01 P 4/ 6
MURATA MFG CO.,LTD.
Reference
Only
W
D
Label
H
11.3. Marking of packaging
(1) Individual packaing
The following items shall be marked on a label and the label is sticked on the Individual packaing.
Customer part number, MURATA part number, Inspection number(1), RoHS marking (2), Quantity, etc
1) « Expression of Inspection No. » □□
OOOO
(1) (2) (3)
(1) Factory Code
(2) Date First digit : Year / Last digit of year
Second digit : Month / Jan. to Sep. 1 to 9, Oct. to Dec. O,N,D
Third, Fourth digit : Day
(3) Serial No.
2) « Expression of RoHS marking » ROHS – Y
(△)
(1) (2)
(1) RoHS regulation conformity parts.
(2) MURATA classification number
(2) Marking for Outside package
The following items shall be marked on a label and the label is sticked on the outside package.
Customer name, Purchasing Order Number, Customer Part Number, MURATA part number,
RoHS marking (2) , Quantity , etc
11.4 Specification of Outer Case
(ex.)
Above Outer Case size is typical. It depends on a quantity of an order.
12. ! Caution
Limitation of Applications
Please contact us before using our products for the applications listed below which require especially high
reliability for the prevention of defects which might directly cause damage to the third party’s life, body or property.
(1) Aircraft equipment (7) Traffic signal equipment
(2) Aerospace equipment (8) Transportation equipment (vehicles, trains, ships, etc.)
(3)Undersea equipment (9) Data-processing equipment
(4)Power plant control equipment (10) Applications of similar complexity and /or reliability requirements
(5) Medical equipment
to the applications listed in the above
(6) Disaster prevention / crime prevention equipment
13. Notice
13.1. Soldering conditions
(1) Flux, Solder
· Rosin-based flux should be used.
Do not use strong acidic flux with halide content exceeding 0.2(wt)% (chlorine conversion value.)
· Use Sn-3.0Ag-0.5Cu solder.
(2) Standard flow soldering profile.
Solder Temperature Soldering Time
250 ~ 260 °C 4 ~ 6 s
Outer Case Dimensions
(mm)
Standard Individual
package Quantity
in Outer Case
W D H
265 89 118 5
1 minutes min.
Soldering Time
Solder Temperature
250
200
150
100
50
Temperature (°C)
Pre-heating(in air)
Soldering
Gradual Cooling
(in air)
300
150°C
