OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

5962-8851301PA

P1-P3P4-P6P7-P9P10-P12
REVISIONS
LTR DESCRIPTION DATE (YR-MO-DA) APPROVED
A
Page 2, 1.4, add IVR test conditions. Page 4, table I, I
IB
and I
OS
, add footnote
to guarantee subgroup 3. For I
OS
, change unit from pA to nA.
For V
O
, add subgroup 6. Editorial changes throughout.
88-07-19
M. A. FRYE
B
Add device type 02 and case outline, F-4. Editorial changes throughout.
91-03-07
M. A. FRYE
C
Change boilerplate to add one-part part numbers. Add delta test limits.
96-11-13
R. MONNIN
D
Make changes to table IIA. - ro
02-01-07
R. MONNIN
E
Make change to the first condition of the A
VO
test in table I from R
L
= 1 kΩ to
R
L
= 10 kΩ. -rrp
02-07-23
R. MONNIN
F
Drawing updated to reflect current requirements. -rrp
09-03-09
R. HEBER
G
Update drawing to current MIL-PRF-38535 requirements. –rrp
15-01-26
C. SAFFLE
THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED.
REV
SHEET
REV
SHEET
REV STATUS REV G G G G G G G G G G G
OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11
PMIC N/A PREPARED BY
MARCIA B. KELLEHER
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
http://www.landandmaritime.dla.mil
STANDARD
MICROCIRCUIT
DRAWING
THIS DRAWING IS AVAILABLE
FOR USE BY ALL
DEPARTMENTS
AND AGENCIES OF THE
DEPARTMENT OF DEFENSE
CHECKED BY
D. A. DiCENZO
APPROVED BY
ROBERT P. EVANS
MICROCIRCUIT, LINEAR, HIGH SPEED, FAST
SETTLING, PRECISION OPERATIONAL
AMPLIFIER, MONOLITHIC SILICON
DRAWING APPROVAL DATE
87-11-27
AMSC N/A
REVISION LEVEL
G
SIZE
A
CAGE CODE
67268
5962-88513
SHEET 1 OF 11
DSCC FORM 2233
APR 97 5962-E121-15
STANDARD
MICROCIRCUIT DRAWING
SIZE
A
5962-88513
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
REVISION LEVEL
G
SHEET
2
DSCC FORM 2234
APR 97
1. SCOPE
1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device class Q and M)
and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or
Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN.
1.2 PIN. The PIN is as shown in the following examples.
For device class M and Q:
5962
-
88513
01
G
A
Federal
stock class
designator
RHA
designator
(see 1.2.1)
Device
type
(see 1.2.2)
Case
outline
(see 1.2.4)
Lead
finish
(see 1.2.5)
\ /
\/
Drawing number
For device class V:
5962
-
88513
01
V
G
A
Federal
stock class
designator
RHA
designator
(see 1.2.1)
Device
type
(see 1.2.2)
Device
class
designator
Case
outline
(see 1.2.4)
Lead
finish
(see 1.2.5)
\ /
(see 1.2.3)
\/
Drawing number
1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are
marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A
specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
1.2.2 Device type(s). The device type(s) identify the circuit function as follows:
Device type Generic number Circuit function
01 OP-42A High speed, fast settling, precision
operational amplifier
02 OP-42B High speed, fast settling, precision
operational amplifier
1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as listed
below. Since the device class designator has been added after the original issuance of this drawing, device classes M and Q
designators will not be included in the PIN and will not be marked on the device.
Device class Device requirements documentation
M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-
JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A
Q or V Certification and qualification to MIL-PRF-38535
STANDARD
MICROCIRCUIT DRAWING
SIZE
A
5962-88513
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
REVISION LEVEL
G
SHEET
3
DSCC FORM 2234
APR 97
1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows:
Outline letter Descriptive designator Terminals Package style
G MACY1-X8 8 Can
H GDFP1-F10 or CDFP2-F10 10 Flat pack
P GDIP1-T8 or CDIP2-T8 8 Dual-in-line
2 CQCC1-N20 20 Square lead less chip carrier
1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535,
appendix A for device class M.
1.3 Absolute maximum ratings. 1/
Supply voltage (V
S
) ....................................................................... ±20 V
Input voltage (V
IN
) ......................................................................... ±20 V 2/
Differential input voltage ................................................................ ±40 V 2/
Output short-circuit duration .......................................................... Indefinite
Storage temperature range ........................................................... -65°C to +150°C
Lead temperature (soldering, 60 seconds) ..................................... +300°C
Power dissipation (P
D
) ................................................................... 500 mW 3/
Thermal resistance, junction-to-case (θ
JC
) .................................... See MIL-STD-1835
Thermal resistance, junction-to-ambient (θ
JA
):
Case G ....................................................................................... 150°C/W
Cases H and P ........................................................................... 119°C/W
Case 2 ........................................................................................ 120°C/W
1.4 Recommended operating conditions.
Supply voltage (V
S
) ........................................................................ ±15 V
Source resistance (R
S
) .................................................................. 50 Ω
Common mode voltage (V
CM
) ....................................................... 0 V
Input voltage range (V
INR
) ............................................................. ±11 V
Ambient operating temperature range (T
A
) .................................... -55°C to +125°C
_____
1/ Unless otherwise specified, T
A
= +25°C.
2/ For supply voltages less than 20 V, the absolute maximum input voltage is equal to the supply voltage.
3/ Must withstand the added P
D
due to short circuit test, e.g., I
SC
.
P1-P3P4-P6P7-P9P10-P12

5962-8851301PA

Mfr. #:
Buy 5962-8851301PA
Manufacturer:
Analog Devices Inc.
Description:
Precision Amplifiers HI-SPD FAST SETTL PREC IC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet