NLX1G74
http://onsemi.com
2
MAXIMUM RATINGS
Symbol Parameter Value Unit
V
CC
DC Supply Voltage −0.5 to +7.0 V
V
I
DC Input Voltage −0.5 to +7.0 V
V
O
DC Output Voltage − Output in High or Low State (Note 1) −0.5 to V
CC
+0.5 V
I
IK
DC Input Diode Current V
I
< GND −50 mA
I
OK
DC Output Diode Current V
O
< GND −50 mA
I
O
DC Output Sink Current ±50 mA
I
CC
DC Supply Current Per Supply Pin ±100 mA
I
GND
DC Ground Current Per Ground Pin ±100 mA
T
STG
Storage Temperature Range −65 to +150 °C
T
L
Lead Temperature, 1 mm from Case for 10 Seconds 260 °C
T
J
Junction Temperature Under Bias +150 °C
q
JA
Thermal Resistance (Note 2) 250 °C/W
P
D
Power Dissipation in Still Air at 85°C 250 mW
MSL Moisture Sensitivity Level 1
F
R
Flammability Rating Oxygen Index: 28 to 34 UL 94 V−0 @ 0.125 in
V
ESD
ESD Withstand Voltage Human Body Model (Note 3)
Machine Model (Note 4)
Charged Device Model (Note 5)
>2000
>200
N/A
V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. I
O
absolute maximum rating must be observed.
2. Measured with minimum pad spacing on an FR4 board, using 10 mm X 1 inch, 2 ounce copper trace with no air flow.
3. Tested to EIA/JESD22−A114−A.
4. Tested to EIA/JESD22−A115−A.
5. Tested to JESD22−C101−A.
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min Max Unit
V
CC
Supply Voltage Operating
Data Retention Only
1.65
1.5
5.5
5.5
V
V
I
Input Voltage (Note 6) 0 5.5 V
V
O
Output Voltage (HIGH or LOW State) 0 V
CC
V
T
A
Operating Free−Air Temperature −40 +85 °C
Dt/DV
Input Transition Rise or Fall Rate V
CC
= 2.5 V ±0.2 V
V
CC
= 3.0 V ±0.3 V
V
CC
= 5.0 V ±0.5 V
0
0
0
20
10
5.0
ns/V
6. Unused inputs may not be left open. All inputs must be tied to a high−logic voltage level or a low−logic input voltage level.
ORDERING INFORMATION
Device Package Shipping
†
NLX1G74MUTCG UQFN8
(Pb−Free)
3000 / Tape & Reel
NLVX1G74MUTCG* UQFN8
(Pb−Free)
3000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP
Capable.
