RT9073A
®
DS9073A-03 June 2017 www.richtek.com
1
©
Copyright 2017 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.
1
μμ
μμ
μA I
Q
, 250mA Low-Dropout Linear Regulator
Applications
Portable, Battery Powered Equipment
Ultra Low Power Microcontrollers
Notebook Computers
General Description
The RT9073A is a low-dropout (LDO) voltage regulators
with enable function that operates from 1.2V to 5.5V. It
provides up to 250mA of output current and offers low-
power operation in miniaturized packaging.
The features of low quiescent current as low as 1μA and
almost zero disable current is ideal for powering the battery
equipment to a longer service life. The RT9073A is stable
with the ceramic output capacitor over its wide input range
from 1.2V to 5.5V and the entire range of output load
current (0mA to 250mA).
Features
1
μμ
μμ
μA Ground Current at no Load
PSRR = 75dB at 1kHz
±±
±±
±2% Output Accuracy
250mA (V
IN
2.3V) Output Current with EN
Low (0.1
μμ
μμ
μA) Disable Current
1.2V to 5.5V Operating Input Voltage
Dropout Voltage : 0.45V (typ.) at 250mA when V
OUT
3V
Support Fixed Output Voltage 0.9V, 1.05V, 1.2V, 1.5V,
1.8V, 1.9V, 2.5V, 2.7V, 2.8V, 2.9V, 3V, 3.3V
Stable with Ceramic or Tantalum Capacitor
Current Limit Protection
Over Temperature Protection
ZQFN-4L 1x1 (ZDFN-4L 1x1), SC-82 Packages
Available
Marking Information
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
area.
Ordering Information
Note :
Richtek products are :
RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering processes.
Package Type
QZ : ZQFN-4L 1x1 (Z-Type)
(ZDFN-4L 1x1)
Y : SC-82
RT9073A-
Lead Plating System
G : Green (Halogen Free and Pb Free)
Output Voltage
09 : 0.9V
1K : 1.05V
12 : 1.2V
15 : 1.5V
18 : 1.8V
19 : 1.9V
25 : 2.5V
27 : 2.7V
28 : 2.8V
29 : 2.9V
30 : 3.0V
33 : 3.3V
Special Request: Any Voltage
Between 0.9V and 3.3V under
specific business agreement
RT9073A
2
DS9073A-03 June 2017www.richtek.com
©
Copyright 2017 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.
Functional Pin Description
Pin No.
Pin Name Pin Function
ZQFN-4L 1x1 (ZDFN-4L 1x1) SC-82 (SSOT-24)
1 3 VOUT Output of the regulator.
2 2 GND Ground.
3 1 EN Enable control input.
4 4 VIN Supply voltage input.
5 (Exposed Pad) -- SGND Substrate of chip. Leave floating or tie to GND.
Pin Configuration
(TOP VIEW)
ZQFN-4L 1x1 (ZDFN-4L 1x1)
VOUT VIN
GND EN
1
2
3
4
SGND
5
SC-82 (SSOT-24)
VIN
VOUT
EN
GND
3
2
4
RT9073A
3
DS9073A-03 June 2017 www.richtek.com
©
Copyright 2017 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.
Functional Block Diagram
Operation
Basic operation
The RT9073A is a low quiescent current linear regulator
designed especially for low external components system.
The input voltage range is from 1.2V to 5.5V.
The minimum required output capacitance for stable
operation is 1μF effective capacitance after consideration
of the temperature and voltage coefficient of the capacitor.
Output Transistor
The RT9073A builds in a P-MOSFET output transistor
which provides a low switch-on resistance for low dropout
voltage applications.
Error Amplifier
The Error Amplifier compares the internal reference voltage
with the output feedback voltage from the internal divider,
and controls the Gate voltage of P-MOSFET to support
good line regulation and load regulation at output voltage.
Enable
The RT9073A delivers the output power when it is set to
enable state. When it works in disable state, there is no
output power and the operation quiescent current is almost
zero.
Current Limit Protection
The RT9073A provides current limit function to prevent
the device from damages during over-load or shorted-circuit
condition. This current is detected by an internal sensing
transistor.
Over Temperature Protection
The over temperature protection function will turn off the
P-MOSFET when the junction temperature exceeds 150°C
(typ.), V
IN
1.5V and the output current exceeds 30mA.
Once the junction temperature cools down by
approximately 20°C, the regulator will automatically
resume operation.
VIN
GND
EN
VOUT
R1
R2
Current/Thermal
Sense
Bandgap
Reference
+
-

RT9073A-18GQZ

Mfr. #:
Manufacturer:
Description:
IC REG LINEAR 1.8V 250MA 4ZQFN
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet