1
®
FN6775.0
ISL9518, ISL9518A
Narrow VDC Regulator/Charger with
SMBus Interface
The ISL9518, ISL9518A are highly integrated Narrow VDC
system voltage regulators and battery charger controllers.
Operating parameters are programmable over the System
Management Bus (SMBus). The ISL9518, ISL9518A are
designed for applications where the system power source is
either the battery pack or the output of the regulator/charger.
This makes the max voltage to the system equal to the max
battery voltage instead of the max adapter voltage. The
ISL9518, ISL9518A also include a system to control trickle
charging deeply discharged batteries while maintaining
system voltage at a user defined minimum. High efficiency is
achieved with a DC/DC synchronous-rectifier buck converter,
equipped with diode emulation for enhanced light load
efficiency and AC-adapter boosting prevention. The ISL9518,
ISL9518A can charge two to four series connected
Lithium-ion cells, at up to 8A charge current. The ISL9518
has default settings for 2-cell systems and the ISL9518A has
default settings for 3-cell systems. Integrated MOSFET
drivers and bootstrap diode result in fewer components and
smaller implementation area. Low offset current-sense
amplifiers provide high accuracy.
The ISL9518, ISL9518A provide two open drain digital
outputs that indicate the presence of the AC adapter and
trickle charge state. Trickle charge state and AC adapter
present indicators are also available via SMBus. The
ISL9518, ISL9518A also provide two analog outputs that
indicate the adapter current and battery discharge current
with 4% accuracy.
Pinout
ISL9518, ISL9518A
(28 LD TQFN)
TOP VIEW
Features
±0.5% System Voltage Accuracy (-10°C to +100°C)
±3% Accurate Input Current Limit
±3% Accurate Battery Charge Current Limit
Switching Frequency can be Reduced via SMBus for
Higher Efficiency at Light Load Conditions
Trickle Charge System for Deeply Discharged Batteries
- Automatic Trickle Charge Current (256mA)
- Holds Minimum Voltage to System
SMBus 2-Wire Serial Interface
Battery Short Circuit Protection
Fast System-Load Transient Response
Monitor Outputs
- Adapter Current (2.5% Accuracy)
- Trickle Charge Mode Indicator
- AC-Adapter Present Indicator
11-Bit Max System Voltage Setting
7-Bit Min System Voltage Setting
6-Bit Charge Current Setting
6-Bit Adapter Current Setting
Over 8A Battery Charger Current
Over 8A Maximum Adapter Current
+8V to +22V Adapter Voltage Range
Pb-Free (RoHS Compliant)
Applications
Notebook Computers
Tablet PCs
Portable Equipment with Rechargeable Batteries
CSIP
CSIN
AGND
BOOT
UGATE
PHASE
PGND
VFB
ACMON
SDA
SCL
VSMB
TRKLN
ADPR
SGATE
DCIN
ADET
VREF
ICOMP
AGND
VCOMP
LGATE
VDDP
VDD
CSOP
CSON
BGATE
AGND
1
2
3
4
5
6
7
21
20
19
18
17
16
15
28 27 26 25 24 23 22
8 9 10 11 12 13 14
Data Sheet December 8, 2008
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
2
FN6775.0
December 8, 2008
Ordering Information
PART NUMBER
(Note)
PART
MARKING
TEMP RANGE
(°C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL9518HRTZ* 951 8HRTZ -10 to +100 28 Ld 4x4 TQFN L28.4x4A
ISL9518AHRTZ* 951 8AHRTZ -10 to +100 28 Ld 4x4 TQFN L28.4x4A
*Add “-T” suffix for tape and reel. Please refer to TB347 for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100%
matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations).
Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J
STD-020.
FIGURE 1. FUNCTIONAL BLOCK DIAGRAM
SMBus
VSMB
DC/DC
CONVERTER
SDA
CSOP
PHASE
LGATE
UGATE
BOOT
PGND
VDDP
SCL
CSON
CSIP
CSIN
ICOMP
VDD
6
6
11
REFERENCE
LINEAR
REGULATOR
DCIN
VREF
ADET
ADPR
VREF
CSIP
EN
VDD
ISOLATE ADAPTER
AC_PR
TRICKLE
7
SGATE
ISOLATE ADAPTER
CHARGE CURRENT
ADAPTER CURRENT
MAXSYSTEMVOLTAGE
MINSYSTEMVOLTAGE
CC DAC
AC DAC
AC DAC
CC DAC
MAXSVDAC
20x
+
-
+
-
GM2
VMIN
IMIN
20x
+
-
+
-
MINSVDAC
CSON
100k
500k
BGATE
TRKLN
+
-
GM1
TRICKLE
TRICKLE
CSON
AC_PR
ISL9518, ISL9518A
VCOMP
VFB
AGND
MINSVDAC
MAXSVDAC
FSW
FSW
+
-
GM4
+
-
GM3
LOW POWER
ACMON
+
-
ISL9518, ISL9518A
3
FN6775.0
December 8, 2008
FIGURE 2. TYPICAL APPLICATION CIRCUIT
AC-ADAPTER
TO BATTERY
TO SYSTEM
RS1
RS2
AGND
PGND
AGND
PHASE
BOOT
UGATE
LGATE
CSINCSIP
CSOP
CSON
ADET
SCL
VREF
DCIN
SDA
VSMB
VDD
ADPR
AGND
SGATE
BGATE
TRKLN
ICOMP
VCOMP
VDDP
VFB
ISL9518, ISL9518A
HOST
PGND
PGND
AGND
ACMON
AGND
AGND
ISL9518, ISL9518A

ISL9518HRTZ

Mfr. #:
Manufacturer:
Renesas / Intersil
Description:
Battery Management TQFN ISL9518 NOTEBOOK BATRY CHRGR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet