DOC#: SP-AP-0014 (Rev. 0.2) Page 7 of 13
Absolute Maximum Conditions
Parameter Description Condition Min. Max. Unit
V
DD_3.3V
Main Supply Voltage Functional – 4.6 V
V
IN
Input Voltage Relative to V
SS
–0.5 4.6 V
DC
T
S
Temperature, Storage Non-functional –65 150 °C
T
A
Industrial Temperature,
Operating Ambient
Functional –40 85 °C
T
A
Commercial Temperature,
Operating Ambient
Functional 0 85 °C
T
J
Temperature, Junction Functional – 150 °C
Ø
JC
Dissipation, Junction to Case JEDEC (JESD 51) – 20 °C/
W
Ø
JA
Dissipation, Junction to Ambient JEDEC (JESD 51) – 60 °C/
W
ESD
HBM
ESD Protection (Human Body
Model)
JEDEC (JESD 22 - A114) 2000 – V
UL-94 Flammability Rating UL (Class) V–0
Multiple Supplies: The Voltage on any input or I/O pin cannot exceed the power pin during power-up. Power supply sequencing is NOT required.
DC Electrical Specifications
Parameter Description Condition Min. Max. Unit
VDD core 3.3V Operating Voltage 3.3 ± 5% 3.135 3.465 V
V
IH
3.3V Input High Voltage (SE) 2.0 V
DD
+ 0.3 V
V
IL
3.3V Input Low Voltage (SE) V
SS
– 0.3 0.8 V
V
IHI2C
Input High Voltage SDATA, SCLK 2.2 – V
V
ILI2C
Input Low Voltage SDATA, SCLK – 1.0 V
V
IH_SS[1:0]_HIGH
SS Input High Voltage 0.7 VDD+0.3 V
V
IH_SS[1:0]_MID
SS Input MIDVoltage 0.7 1.5 V
V
IL_SS[1:0]_LOW
SS Input Low Voltage V
SS
– 0.3 0.35 V
I
IH
Input High Leakage Current Except internal pull-down resistors, 0 < V
IN
<
V
DD
–5A
I
IL
Input Low Leakage Current Except internal pull-up resistors, 0 < V
IN
< V
DD
–5 – A
V
OH
3.3V Output High Voltage (SE) I
OH
= –1 mA 2.4 – V
V
OL
3.3V Output Low Voltage (SE) I
OL
= 1 mA – 0.4 V
I
OZ
High-impedance Output
Current
–10 10 A
C
IN
Input Pin Capacitance 1.5 5 pF
C
OUT
Output Pin Capacitance 6 pF
L
IN
Pin Inductance – 7 nH
IDD_
PD
Power Down Current – 1 mA
I
DD_3.3V
Dynamic Supply Current in
synthesizer mode
Differential clocks with 5” traces and 2pF load,
frequency at 100MHz.
–50mA
I
DD_3.3V
Dynamic Supply Current in
fanout mode
Differential clocks with 5” traces and 2pF load,
frequency at 100MHz.
–30mA
