© Semiconductor Components Industries, LLC, 2013
May, 2013 − Rev. 4
1 Publication Order Number:
NCV4279A/D
NCV4279A
5.0 V Micropower 150 mA
LDO Linear Regulator with
DELAY, Adjustable RESET,
and Sense Output
The NCV4279A is a 5.0 V precision micropower voltage regulator
with an output current capability of 150 mA.
The output voltage is accurate within ±2.0% with a maximum
dropout voltage of 0.5 V at 100 mA. Low quiescent current is a feature
drawing only 150 mA with a 1.0 mA load. This part is ideal for any and
all battery operated microprocessor equipment.
Microprocessor control logic includes an active reset output RO
with delay and a SI/SO monitor which can be used to provide an early
warning signal to the microprocessor of a potential impending reset
signal. The use of the SI/SO monitor allows the microprocessor to
finish any signal processing before the reset shuts the microprocessor
down.
The active Reset circuit operates correctly at an output voltage as
low as 1.0 V. The Reset function is activated during the power up
sequence or during normal operation if the output voltage drops
outside the regulation limits.
The reset threshold voltage can be decreased by the connection of an
external resistor divider to the R
ADJ
lead. The regulator is protected
against reverse battery, short circuit, and thermal overload conditions.
The device can withstand load dump transients making it suitable for
use in automotive environments. The device has also been optimized
for EMC conditions.
If the application requires pullup resistors at the logic outputs Reset
and Sense Out, the NCV4269A with integrated resistors can be used.
Features
• 5.0 V ± 2.0% Output
• Low 150 mA Quiescent Current
• Active Reset Output Low Down to V
Q
= 1.0 V
• Adjustable Reset Threshold
• 150 mA Output Current Capability
• Fault Protection
♦ +60 V Peak Transient Voltage
♦ −40 V Reverse Voltage
♦ Short Circuit
♦ Thermal Overload
• Early Warning through SI/SO Leads
• Internally Fused Leads in SO−14 Package
• Very Low Dropout Voltage
• Electrical Parameters Guaranteed Over Entire Temperature Range
• These are Pb−Free Devices
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
http://onsemi.com
MARKING
DIAGRAMS
A = Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
G, G = Lead Free Indicators
SO−8
D1 SUFFIX
CASE 751
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 13 of this data sheet.
1
8
4279A5
ALYW
G
1
8
GNDD
18
ROR
ADJ
SOSI
QI
PIN CONNECTIONS
SO−14
D2 SUFFIX
CASE 751A
1
14
NCV4279A5G
AWLYWW
1
14
SORO
QGND
GNDGND
GNDGND
114
GNDGND
ID
SIR
ADJ
SO−14
SO−8