6.42
IDT70V9179L
High-Speed 32K x 9 Dual-Port Synchronous Pipelined Static RAM Industrial and Commercial Temperature Ranges
15
Depth and Width Expansion
The IDT70V9179 features dual chip enables (refer to Truth Table I)
in order to facilitate rapid and simple depth expansion with no requirements
for external logic. Figure 4 illustrates how to control the varioius chip
enables in order to expand two devices in depth.
The IDT70V9179 can also be used in applications requiring expanded
width, as indicated in Figure 4. Since the banks are allocated at the
discretion of the user, the external controller can be set up to drive the input
signals for the various devices as required to allow for 18-bit or wider
applications.
Figure 4. Depth and Width Expansion with IDT70V9179
Functional Description
The IDT70V9179 provides a true synchronous Dual-Port Static RAM
interface. Registered inputs provide minimal set-up and hold times on
address, data, and all critical control inputs. All internal registers are clocked
on the rising edge of the clock signal, however, the self-timed internal write
pulse is independent of the LOW to HIGH transition of the clock signal.
An asynchronous output enable is provided to ease asynchronous
bus interfacing. Counter enable inputs are also provided to staff the
operation of the address counters for fast interleaved memory applications.
CE0 = VIH or CE1 = VIL for one clock cycle will power down the internal
circuitry to reduce static power consumption. Multiple chip enables allow
easier banking of multiple IDT70V9179's for depth expansion configura-
tions. When the Pipelined output mode is enabled, two cycles are required
with CE0 = VIL and CE1 = VIH to re-activate the outputs.
4860 drw 18_79
IDT70V9179
CE
0
CE
1
V
DD
Control Inputs
CE
1
CE
0
IDT70V9179
Control Inputs
CE
0
CE
1
A
14
CE
1
CE
0
IDT70V9179
Control Inputs
IDT70V9179
Control Inputs
CNTRST
CLK
ADS
CNTEN
R/W
OE
V
DD