AD8xx-xx to AD9xx-xx
Output Transistor Current in Short Circuit mode:
Current (mA)
100
200
300
Time
t
2
t
1
Output Transistor Current in Short Circuit
Notes:
1. The t
2
Cap is used to delay the startup of the SCP circuitry, in order to avoid triggering the SCP
circuitry on normal startup transients: see t
2
on the graph above. Typical value is 16V, 0.001μF, for
a 35μs delay.
2. The t
1
Cap is used to set the “Off” time of the SCP circuitry; see t
1
on the graph above. Typical
value is 16V, 0.01μF, for a 15ms Off time.
3. The voltage across R
SHORT
is monitored by the IC; if this voltage exceeds 145mV (typical), the SCP
circuitry is activated. Typical value of R
SHORT
is 0.47 Ohms, 1/16 watt. This will result in SCP
circuitry turning on at about 300mA of output current.
4. R
BIAS1
and R
BIAS2
are used to bias the output transistor. Typical values for R
BIAS1
and R
BIAS2
are 16K
and 3K, respectively, to supply 1mA drive to the output transistor.
5. R
LED
is sized for whatever LED current is required by the user; maximum of 3 mA.
Magnetic Characteristics:
Typical Operate
Point
Minimum
Operate Point
Maximum
Operate Point
Minimum
Differential
1,2
Maximum
Differential
1,2
20 15 25 5 14
28 21 32.5 5 15
40 30 50 5 25
80 60 100 5 35
Note: All Values in Oersteds (Oe); 1 Oe = 1 Gauss in Air
NVE Corporation 11409 Valley View Road, Eden Prairie, Minnesota 55344 USA
(800) 467-7141 Web: www.nve.com
Email: info@nve.com 11/15/02
AD8xx-xx to AD9xx-xx
NVE Corporation 11409 Valley View Road, Eden Prairie, Minnesota 55344 USA
(800) 467-7141 Web: www.nve.com
Email: info@nve.com 11/15/02
Electrical Specifications:
Parameter Symbol Min Max Units Test Condition
Supply Voltage
4
V
CC
4.5 30 V Operating
Supply Current I
CC
1.75 3.5 mA Output Off, V
CC
=12V
Current Sinking Output
2
I
O
0 2.0 mA
3
Operating
Current Sourcing Output
2
I
O
0 2.0 mA
3
Operating
Output Leakage Current I
LEAK
10
μA
Output Off, V
CC
=12V
Sinking Output Saturation Voltage V
OL
0.4 V Output On, I
OL
=2mA
Sourcing Output Saturation Voltage V
OH
V
CC
-2.0 V Output On, I
OL
=2mA
Regulated Output Voltage
6
V
REG
3.5 6.0 V Operating
Regulated Output Current I
REG
3.0 mA Operating
Short High Voltage ShortH 0.12 0.17 V Output On
Short Low Voltage ShortL 0.12 0.17 V Output On
Absolute Maximum Ratings:
Parameter Symbol Min Max Units
Supply Voltage V
CC
33 V
Reverse Battery Voltage V
RBP
-0.5 V
Current Sinking Output Off Voltage 33 V
Current Sourcing Output Off Voltage 0 V
Current Sinking Reverse Output Voltage -0.5 V
Current Sourcing Reverse Output Voltage -0.5 V
Continuous Output Current I
0
5 mA
Operating Temperature Range
4
T
A
-40 125
°C
Storage Temperature Range T
S
-65 135
°C
Magnetic Field
5
H None Oe
Notes:
1. Differential = Operate Point – Release Point
2. Minimum Release Point for AD8xx-xx to AD9xx-xx = 5 Oe.
3. Output current must be limited by a series resistor. Exceeding absolute maximum continuous output
current ratings will result in damage to the part.
4. Thermal power dissipation for the packages used by NVE is 240°C/Watt for the SOIC8 package, and
320°C/Watt for the MSOP8 and TDFN6 packages. See the Figure on Ambient Temperature vs. Supply
Voltage for derating information. Heat sinking the parts by attaching them to a PCB improves
temperature performance.
5. There is no maximum magnetic field that will cause damage to the device.
6. If V
CC
>6.6V, V
REG
=5.8V. If V
CC
<6.6V, V
REG
= V
CC
–0.9V.
ADH0xx-xx ADH0xx-xx
Features: Features:
Precision Low Field Magnetic Operate Point Precision Low Field Magnetic Operate Point
Excellent Temperature and Voltage Performance Excellent Temperature and Voltage Performance
Digital Output Digital Output
Frequency Response 0 to 250KHz Frequency Response 0 to 250KHz
Small, Low Profile Surface Mount Packages Small, Low Profile Surface Mount Packages
Applications: Applications:
Low Field Digital Position Sensing Low Field Digital Position Sensing
Pneumatic Cylinder Position Sensing Pneumatic Cylinder Position Sensing
Speed Sensing Speed Sensing
Description: Description:
The NVE ADH0xx Series GMR Switch uses NVE’s high sensitivity, high temperature
GMR material to provide a very low magnetic field operate point. It offers the same
precision operate points over all temperature and input voltage conditions as our other
GMR Switch products. It is available in standard form as the NVE ADH025-00 with a
magnetic trigger field of 10 Gauss, a current sinking output, and a cross axis
configuration. Custom versions with trigger fields ranging from 6 to 40 Gauss, and
different output options and sensitivity directions could be manufactured for specific
customer requirements; please contact NVE for details.
The NVE ADH0xx Series GMR Switch uses NVE’s high sensitivity, high temperature
GMR material to provide a very low magnetic field operate point. It offers the same
precision operate points over all temperature and input voltage conditions as our other
GMR Switch products. It is available in standard form as the NVE ADH025-00 with a
magnetic trigger field of 10 Gauss, a current sinking output, and a cross axis
configuration. Custom versions with trigger fields ranging from 6 to 40 Gauss, and
different output options and sensitivity directions could be manufactured for specific
customer requirements; please contact NVE for details.
Note: Functional Block Diagram for the NVE ADH0xx-xx Series sensors is the same as
for the NVE AD0xx-xx sensors.
Note: Functional Block Diagram for the NVE ADH0xx-xx Series sensors is the same as
for the NVE AD0xx-xx sensors.
Output Characteristic as a Function of Magnetic
Field, ADH025-00
0
2
4
6
8
10
12
-14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14
A
pplied Magnetic Field (Oe)
Output Current, mA
(10V Supply, 1K Load Resistor)
OFF OFF ONON
NVE Corporation 11409 Valley View Road, Eden Prairie, Minnesota 55344 USA
(800) 467-7141 Web: www.nve.com
Email: info@nve.com 11/15/02

ADH025-00

Mfr. #:
Manufacturer:
Description:
MAGNETIC SWITCH OMNIPOLAR 8MSOP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union