GMR Switch Product Selection Guide
Package Type
NVE GMR Switches are available in three different packages: an SOIC 8 pin package,
an MSOP 8 pin small outline package, and a TDFN 6 pin ultra-miniature package.
Package drawings are shown in the Appendix.
The following table defines the last two digits in the NVE AD part number:
NVE AD x xx-xx
Number Package Type
00 MSOP8
02 SOIC8
10
1
TDFN6
Note
1
: At this time, the TDFN6 package is only available in AD0xx-10 configuration.
In addition to these three package types, NVE offers a custom version of the MSOP8
package for the NVE AD024-00 part. In this version, the BD012-00, all three
connections are made on one side of the package, and the pins on the other side of the
package are clipped off flush with the body of the package. This allows the user to
position the sensing element as close to the edge of a circuit board or assembly as
possible. A pinout of this package is shown below:
BD012-00
Cross Axis
VCC
N/C*
Out
Ground
The maximum length of the clipped leads is 0.30mm, leading to an overall package
length of 4.25mm, as compared to 4.90mm for the normal MSOP8 package. This part is
available in tape and reel format only.
Other versions of the GMR Switch may be available in this package configuration on a
special order basis. Please contact NVE for further information.
NVE Corporation 11409 Valley View Road, Eden Prairie, Minnesota 55344 USA
(800) 467-7141 Web: www.nve.com
Email: info@nve.com 11/15/02
