OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

RX6000

P1-P3P4-P6P7-P9P10-P10
©2010-2014 by Murata Electronics N.A., Inc.
RX6000 (R) 10/20/14 Page 1 of 10
www.murata.com
RFM products are now
Murata products.
• Designed for Short-Range Wireless Control and Data Communications
• Supports RF Data Transmission Rates Up to 115.2 kbps
• 3 V, Low Current Operation plus Sleep Mode
• Stable, Easy to Use, Low External Parts Count
• Complies with Directive 2002/95/EC (RoHS)
The RX6000 hybrid receiver is ideal for short-range wireless control and data applications where robust
operation, small size, low power consumption and low cost are required. The RX6000 employs Murata’s
amplifier-sequenced hybrid (ASH) architecture to achieve this unique blend of characteristics. All critical RF
functions are contained in the hybrid, simplifying and speeding design-in. The RX6000 is sensitive and stable.
A wide dynamic range log detector, in combination with digital AGC and a compound data slicer, provide
robust performance in the presence of on-channel interference or noise. Two stages of SAW filtering provide
excellent receiver out- of-band rejection. The RX6000 generates virtually no RF emissions, facilitating
compliance with FCC 15.249 and similar regulations.
Absolute Maximum Ratings
Rating Value Units
Power Supply and All Input/Output Pins -0.3 to +4.0 V
Non-Operating Case Temperature -50 to +100 °C
Soldering Temperature (10 seconds / 5 cycles max.) 260 °C
916.50 MHz
Hybrid
Receiver
RX6000
SM-20H Case
Electrical Characteristics
Characteristic Sym Notes Minimum Typical Maximum Units
Operating Frequency f
o
916.30 916.70 MHz
Modulation Types OOK & ASK
Data Rate 115.2 kbps
Receiver Performance, High Sensitivity Mode
Sensitivity, 2.4 kbps, 10-3 BER, AM Test Method 1 -106 dBm
Sensitivity, 2.4 kbps, 10-3 BER, Pulse Test Method 1 -100 dBm
Current, 2.4 kbps (R
PR
= 330 K) 2 3.0 mA
Sensitivity, 19.2 kbps, 10-3 BER, AM Test Method 1 -101 dBm
Sensitivity, 19.2 kbps, 10-3 BER, Pulse Test Method 1 -95 dBm
Current, 19.2 kbps (R
PR
= 330 K) 2 3.1 mA
Sensitivity, 115.2 kbps, 10-3 BER, AM Test Method 1 -97 dBm
Sensitivity, 115.2 kbps, 10-3 BER, Pulse Test Method 1 -91 dBm
Current, 115.2 kbps 3.8 mA
Receiver Performance, Low Current Mode
Sensitivity, 2.4 kbps, 10-3 BER, AM Test Method 1 -104 dBm
Sensitivity, 2.4 kbps, 10-3 BER, Pulse Test Method 1 -98 dBm
Current, 2.4 kbps (R
PR
= 1100 K) 2 1.8 mA
©2010-2014 by Murata Electronics N.A., Inc.
RX6000 (R) 10/20/14 Page 2 of 10
www.murata.com
Electrical Characteristics (typical values given for 3.0 Vdc power supply, 25 °C)
Characteristic Sym Notes Minimum Typical Maximum Units
Receiver Out-of-Band Rejection, ±5% fo
R
±5%
380dB
Receiver Ultimate Rejection
R
ULT
3 100 dB
Sleep Mode Current
I
S
0.7 µA
Power Supply Voltage Range
V
CC
2.2 3.7 Vdc
Power Supply Voltage Ripple 10
mV
P-P
Ambient Operating Temperature
T
A
-40 85 °C
1. Typical sensitivity data is based on a 10
-3
bit error rate (BER), using DC-balanced data. There are two test methods commonly used to measure OOK/ASK
receiver sensitivity, the “100% AM” test method and the “Pulse” test method. Sensitivity data is given for both test methods. See Appendix 3.8 in the ASH
Transceiver Designer’s Guide for the details of each test method, and for sensitivity curves for a 2.2 to 3.7 V supply voltage range at five operating
temperatures. The application/test circuit and component values are shown on the next page and in the Designer’s Guide.
2. At low data rates it is possible to adjust the ASH pulse generator to trade-off some receiver sensitivity for lower operating current. Sensitivity data and receiver
current are given at 2.4 kbps for both high sensitivity operation (R
PR
= 330 K) and low current operation (R
PR
= 1100 K).
3. Data is given with the ASH radio matched to a 50 ohm load. Matching component values are given on the next page.
4. See Table 1 on Page 8 for additional information on ASH radio event timing.
Dimension
mm Inches
Min Nom Max Min Nom Max
A 9.800 10.033 10.135 .388 .395 .400
B 6.650 6.858 6.985 .261 .270 .275
C 1.735 1.930 2.032 .068 .076 .080
D 1.645 1.778 1.905 .064 .070 .075
E 0.381 0.508 0.635 .015 .020 .025
F 0.889 1.016 1.143 .035 .040 .045
G 3.175 3.302 3.429 .125 .130 .135
H 1.360 1.524 1.651 .055 .060 .065
3
4
5
6
7
9
11
12
13
14
15
16
17
19
ASH Transceiver Pin Out
RFIO
8
2
10
201
18
LPFADJ
RREF
THLD2
AGCCAP
PKDET
BBOUT
CMPIN
RXDATA
TXMOD THLD1
PRATE
PWIDTH
GND1
VCC1
GND2
VCC2
GND3
CNTRL0
CNTRL1
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
NOTES:
S M - 2 0 H P a c k a g e D r a w i n g
*
)
+ ,
-
.
/
0
©2010-2014 by Murata Electronics N.A., Inc.
RX6000 (R) 10/20/14 Page 3 of 10
www.murata.com
Data Output
TOP VIEW
GND
3
CNT
RL0
CNT
RL1
P
WIDTH
P
RATE
THLD
1
NC
RREF
GND2
NC
RX
DATA
LPF
ADJ
CMP
IN
BB
OUT
PK
DET
RF
A1
VCC
1
VCC
2
RFIO
GND1
+ 3
VDC
ASH Receiver Application Circuit
OOK Configuration
1
20
23456789
10
11
1213141516171819
+ 3
VDC
R
PW
R
PR
R
TH1
R
REF
R
LPF
C
BBO
C
DCB
L
AT
L
ESD
C
RFB1
+
R/S
C
LPF
R
BBO
Data Output
TOP VIEW
GND
3
CNT
RL0
CNT
RL1
P
WIDTH
P
RATE
THLD
1
THLD
2
RREF
GND2
NC
RX
DATA
LPF
ADJ
CMP
IN
BB
OUT
PK
DET
AGC
CAP
VCC
1
VCC
2
RFIO
GND1
+ 3
VDC
ASH Receiver Application Circuit
ASK Configuration
1
20
23456789
10
11
1213141516171819
+ 3
VDC
R
PW
R
PR
R
TH1
R
TH2
R
REF
R
LPF
C
BBO
C
PKD
C
AGC
C
DCB
L
AT
L
ESD
C
RFB1
+
R/S
Receiver Set-Up, 3.0 Vdc, -40 to +85 °C
Item Symbol OOK OOK ASK Units Notes
Nominal NRZ Data Rate DR
NOM
2.4 19.2 115.2 kbps see page 1& 2
Minimum Signal Pulse SP
MIN
416.67 52.08 8.68 µs single bit
Maximum Signal Pulse SP
MAX
1666.68 208.32 34.72 µs 4 bits of same value
AGCCAP Capacitor C
AGC
- - 2200 pF ±10% ceramic
PKDET Capacitor C
PKD
- - 0.001 µF ±10% ceramic
BBOUT Capacitor C
BBO
0.1 0.015 0.0027 µF ±10% ceramic
BBOUT Resistor R
BBO
12 0 0 K ±5%
LPFAUX Capacitor C
LPF
0.0047 - - µF ±5%
LPFADJ Resistor R
LPF
300 100 15 K ±5%
RREF Resistor R
REF
100 100 100 K ±1%
THLD2 Resistor R
TH2
- - 100 K ±1%, for 6 dB below peak
THLD1 Resistor R
TH1
0 0 10 K ±1%, typical values
PRATE Resistor R
PR
330 330 160 K ±5%
PWIDTH Resistor R
PW
270 to GND 270 to GND 1000 to Vcc K ±5%
DC Bypass Capacitor C
DCB
4.7 4.7 4.7 µF tantalum
RF Bypass Capacitor 1 C
RFB1
27 27 27 pF ±5% NPO
Antenna Tuning Inductor L
AT
10 10 10 nH 50 ohm antenna
Shunt Tuning/ESD Inductor L
ESD
100 100 100 nH 50 ohm antenna
P1-P3P4-P6P7-P9P10-P10

RX6000

Mfr. #:
Buy RX6000
Manufacturer:
Description:
RF Receiver 2G ASH Receiver 916.50 MHZ 115.2kbps
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet