NMUSB2022PMC
2 MOPP Powered Dual Port USB Data Isolator
KDC_NMUSB2022PMC.A03 Page 8 of 8
www.murata-ps.com/support
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice. © 2018 Murata Power Solutions, Inc.
This product is subject to the following operating requirements
and the
Life and Safety Critical Application Sales Policy:
Refer to:
http://www.murata-ps.com/requirements/
TAPE & REEL SPECIFICATIONS
REEL OUTLINE DIMENSIONS REEL PACKAGING DETAILS
TAPE OUTLINE DIMENSIONS
COVER TAPE
4.0 [0.157]
20.2±0.15
44.0±0.3
40.4 [1.591]
24.5 [0.963]#
15.65 [0.616]
23.7 [0.932] #
DIRECTION OF UNREELING
36.0 [1.417]
Ø20.2 [Ø0.795]
MIN
Ø330 [13.000] MAX
OR
Ø177.8 [7.000] MAX
1.5 [0.059]
MIN ##
50.4 [1.984] MAX#
13.5
[
Ø
0.531
0.504
]
Ø
12.8
Tape & Reel specifications shall conform with current EIA-481 standard
Unless otherwise stated all dimensions in mm(inches)
Controlling dimension is mm
# Measured at hub
## Six equi-spaced slots on 180mm/7” reel
Tape & Reel specifications shall conform with current EIA-481 standard
Unless otherwise stated all dimensions in mm(inches) ±0.1mm (±0.004 Inches)
Controlling dimension is mm
Components shall be orientated within the carrier tape as indicated
# Measured on a plane 0.3mm above the bottom pocket
Carrier tape pockets shown are illustrative only - Refer to carrier tape diagram for actual pocket details.
Reel Quantity: 7” - 23 or 13” - 92
100 [3.937]
MIN
LEADER SECTION
400 [15.748] MIN
GOODS
ENCLOSURE
SECTION
TRAILER SECTION
160 [6.299] MIN
