LQW32FT100M0HL Datasheet LQW32FT100M0HL, LQW32FT470M0HL, LQW32FT220M0HL | P4-P6

SpecNo.JELF243A-9147A-01 P.4/8

MURATA MFG.CO.,LTD

Reference Only

165 to 180 degree

Cover tape

Plastic tape

8.2 Specification of Taping

(1) Packing quantity (standard quantity)

1,500 pcs. / reel

(2) Packing Method

Products shall be packed in the cavity of the plastic tape and sealed by Cover tape.

(3) Sprocket hole

The sprocket holes are to the right as the tape is pulled toward the user.

(4) Spliced point

Plastic tape and Cover tape has no spliced point.

(5) Missing components number

Missing components number within 0.1% of the number per reel or 1 pc., whichever is greater, and are not

continuous. The Specified quantity per reel is kept.

8.3 Pull Strength

Plastic tape 5N min.

Cover tape 10N min.

8.4 Peeling off force of cover tape

Speed of Peeling off 300mm/min

Peeling off force

0.2N to 0.7N

(minimum value is typical)

8.5 Dimensions of Leader-tape,Trailer and Reel

There shall be leader-tape (cover tape and empty tape) and trailer-tape (empty tape) as follows.

8.6 Marking for reel

Customer part number, MURATA part number, Inspection number(∗1), RoHS marking(∗2), Quantity etc ･･･

∗1) <Expression of Inspection No.> □□ OOOO ×××

(1) (2) (3)

(1) Factory Code

(2) Date First digit : Year / Last digit of year

Second digit

: Month / Jan. to Sep. → 1 to 9, Oct. to Dec. → O, N, D

Third, Fourth digit : Day

(3) Serial No.

∗2) « Expression of RoHS marking » ROHS – Y (△)

(1) (2)

(1) RoHS regulation conformity

(2) MURATA classification number

8.7 Marking for Outside package (corrugated paper box)

Customer name, Purchasing order number, Customer part number, MURATA part number, RoHS Marking (∗2) ,

Quantity, etc ･･･

8.8. Specification of Outer Case

Outer Case Dimensions (mm)

Standard Reel Quantity

in Outer Case (Reel)

W D H

186 186 93 4

∗ Above Outer Case size is typical. It depends on a quantity

of an order.

Label

160 min.

210 min.

190 min.

13.0±0.2

21.0±0.8

180±

60±

13±

17±1.4

Direction of feed

Trailer

Leader

Empty Tape

Cover tape

(in mm)

Label

2.0±0.5

SpecNo.JELF243A-9147A-01 P.5/8

MURATA MFG.CO.,LTD

Reference Only

9. Caution

9.1 Limitation of Applications

Please contact us before using our products for the applications listed below which require especially high reliability

for the prevention of defects which might directly cause damage to the third party's life, body or property.

(1) Aircraft equipment (6) Transportation equipment (trains, ships, etc.)

(2) Aerospace equipment

(7) Traffic signal equipment

(3) Undersea equipment

(8) Disaster prevention / crime prevention equipment

(4) Power plant control equipment

(

9) Data-processing equipment

(5) Medical equipment

(10) Applications of similar complexity and /or reliability

requirements to the applications listed in the above

9.2 Caution(Rating)

Do not exceed maximum rated current of the product. Thermal stress may be transmitted to the product and short /

open circuit of the product or falling off the product may be occurred.

9.3 Fail-safe

Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused

by the abnormal function or the failure of our product.

10. Notice

Products can only be soldered with reflow.

This product is designed for solder mounting.

Please consult us in advance for applying other mounting method such as conductive adhesive.

10.1 Land pattern designing

Recommended land patterns for reflow soldering are as follows：

These have been designed for Electric characteristics and solderability.

Please follow the recommended patterns. Otherwise, their performance which includes electrical performance or

solderability may be affected, or result to "position shift" in soldering process.

Metal mask aperture pattern

SpecNo.JELF243A-9147A-01 P.6/8

MURATA MFG.CO.,LTD

Reference Only

10.2 Flux, Solder

・Use rosin-based flux.

Includes middle activator equivalent to 0.06(wt)% to 0.1(wt) % Chlorine.

Don’t use highly acidic flux with halide content exceeding 0.2(wt) % (chlorine conversion value).

Don’t use water-soluble flux.

・Use Sn-3.0Ag-0.5Cu solder.

・Standard thickness of solder paste : 150μm.

・Please pay attention to solder paste's penetrating in order to avoid short circuit between the lines.

10.3 Reflow soldering conditions

・Pre-heating should be in such a way that the temperature difference between solder and product surface is limited to

150°C max. Cooling into solvent after soldering also should be in such a way that the temperature difference is

limited to 150°C max.

Insufficient pre-heating may cause cracks on the product, resulting in the deterioration of products quality.

・Standard soldering profile and the limit soldering profile is as follows.

The excessive limit soldering conditions may cause leaching of the electrode and / or resulting in the deterioration of

product quality.

・Reflow soldering profile

Standard Profile Limit Profile

Pre-heating 150°C～180°C 、90s±30s

Heating above 220°C､30s～60s above 230°C､60s max.

Peak temperature 245°C±3°C 260°C,10s

Cycle of reflow 2 times 2 times

10.4 Reworking with soldering iron

The following conditions must be strictly followed when using a soldering iron.

Pre-heating 150°C,1 min

Tip temperature 350°C max.

Soldering iron output 80W max.

Tip diameter φ3mm max.

Soldering time 3 (+1,-0)s

Time 2 times

Note：Do not directly touch the products with the tip of the soldering iron in order to prevent the crack

on the products due to the thermal shock.

Limit Profile

Standard Profile

90s±30s

230℃

260℃

245℃±3℃

220℃

30s～60s

60s max.

180

150

Temp.

(s)

(℃)

Time.

P1-P3 P4-P6 P7-P8

LQW32FT100M0HL

Mfr. #:

Buy LQW32FT100M0HL

Manufacturer:

Murata Electronics

Description:

Fixed Inductors 1210 47uH 500mA 500mA AEC-Q200

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

LQW32FT100M0HL

LQW32FT100M0HL

Products related to this Datasheet