OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

CAT9534YI-GT2

P1-P3P4-P6P7-P9P10-P12P13-P14
© Semiconductor Components Industries, LLC, 2011
June, 2011 − Rev. 0
1 Publication Order Number:
CAT9534/D
CAT9534
8-bit I
2
C and SMBus I/O Port
with Interrupt
Description
The CAT9534 is an 8−bit parallel input/output port expander for I
2
C
and SMBus compatible applications. These I/O expanders provide a
simple solution in applications where additional I/Os are needed:
sensors, power switches, LEDs, pushbuttons, and fans.
The CAT9534 consists of an input port register, an output port
register, a configuration register, a polarity inversion register and an
I
2
C/SMBus−compatible serial interface.
Any of the eight I/Os can be configured as an input or output by
writing to the configuration register. The system master can invert the
CAT9534 input data by writing to the active−high polarity inversion
register.
The CAT9534 features an active low interrupt output which
indicates to the system master that an input state has changed.
The device’s extended addressing capability allows up to 8 devices
to share the same bus.
CAT9534 is offered in 16 pin SOIC, TSSOP and TQFN packages
and operates over the full −40°C to +85°C industrial temperature
range.
Features
• 400 kHz I
2
C Bus Compatible
• 2.3 V to 5.5 V Operation
• Low Stand−by Current
• 5 V Tolerant I/Os
• 8 I/O Pins that Default to Inputs at Power−up
• High Drive Capability
• Individual I/O Configuration
• Polarity Inversion Register
• Active Low Interrupt Output
• Internal Power−on Reset
• No Glitch on Power−up
• Noise Filter on SDA/SCL Inputs
• Cascadable up to 8 Devices
• Industrial Temperature Range
• 16−lead SOIC and TSSOP, and 16−pad TQFN (4 x 4 mm) Packages
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Applications
• White Goods (dishwashers, washing machines)
• Handheld Devices (cell phones, PDAs, digital cameras)
• Data Communications (routers, hubs and servers)
TQFN−16
HV4 SUFFIX
CASE 510AE
http://onsemi.com
SOIC−16
W SUFFIX
CASE 751BG
PIN CONNECTIONS
SOIC (W), TSSOP (Y)
(Top View)
1
A0
A1
A2
I/O
1
I/O
0
V
CC
SDA
SCL
INT
I/O
7
I/O
6
I/O
5
I/O
4
I/O
2
I/O
3
V
SS
TSSOP−16
Y SUFFIX
CASE 948AN
See detailed ordering and shipping information in the package
dimensions section on page 14 of this data sheet.
ORDERING INFORMATION
TQFN 4 x 4 mm (HV4)
(Top View)
SCL
INT
I/O
7
I/O
6
A2
I/O
1
I/O
0
I/O
2
A1
A0
V
CC
SDA
I/O
3
I/O
4
V
SS
I/O
5
1
CAT9534
http://onsemi.com
2
Figure 1. Block Diagram
8−BIT
WRITE pulse
READ pulse
LP FILTER
POWER−ON
RESET
INPUT
FILTER
CONTROL
A0
A1
A2
SDA
SCL
INPUT/
OUTPUT
PORTS
INT
V
CC
I/O
0
I/O
1
I/O
2
I/O
3
I/O
4
I/O
5
I/O
6
I/O
7
I
2
C/SMBUS
V
CC
V
SS
Note: All I/Os are set to inputs at RESET.
Table 1. PIN DESCRIPTION
SOIC / TSSOP TQFN Pin Name Function
1 15 A0 Address Input 0
2 16 A1 Address Input 1
3 1 A2 Address Input 2
4−7 2−5 I/O
0−3
Input/Output Port 0 to Input/Output Port 3
8 6 V
SS
Ground
9−12 7−10 I/O
4−7
Input/Output Port 4 to Input/Output Port 7
13 11 INT Interrupt Output (open drain)
14 12 SCL Serial Clock
15 13 SDA Serial Data
16 14 V
CC
Power Supply
Table 2. ABSOLUTE MAXIMUM RATINGS
Parameters Ratings Units
V
CC
with Respect to Ground −0.5 to +6.5 V
Voltage on Any Pin with Respect to Ground −0.5 to +5.5 V
DC Current on I/O
0
to I/O
7
±50 mA
DC Input Current ±20 mA
V
CC
Supply Current 85 mA
V
SS
Supply Current 100 mA
Package Power Dissipation Capability (T
A
= 25°C) 1.0 W
Junction Temperature +150 °C
Storage Temperature −65 to +150 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
Table 3. RELIABILITY CHARACTERISTICS
Symbol Parameter Reference Test Method Min Units
V
ZAP
(Note 1) ESD Susceptibility JEDEC Standard JESD 22 2000 Volts
I
LTH
(Notes 1, 2) Latch−up JEDEC Standard 17 100 mA
1. This parameter is tested initially and after a design or process change that affects the parameter.
2. Latch−up protection is provided for stresses up to 100 mA on address and data pins from −1 V to V
CC
+1 V.
CAT9534
http://onsemi.com
3
Table 4. D.C. OPERATING CHARACTERISTICS (V
CC
= 2.3 to 5.5 V; T
A
= −40°C to +85°C, unless otherwise specified.)
Symbol
Parameter Conditions Min Typ Max Unit
SUPPLIES
V
CC
Supply voltage 2.3 − 5.5 V
I
CC
Supply current Operating mode; V
CC
= 5.5 V;
no load; f
SCL
= 100 kHz
− 104 175
mA
I
stbl
Standby current Standby mode; V
CC
= 5.5 V; no load;
V
I
= V
SS
; f
SCL
= 0 kHz; I/O = inputs
− 0.25 3
mA
I
stbh
Standby current Standby mode; V
CC
= 5.5 V; no load;
V
I
= V
CC
; f
SCL
= 0 kHz; I/O = inputs
− 0.25 1
mA
V
POR
Power−on reset voltage No load; V
I
= V
CC
or V
SS
− 1.5 1.65 V
SCL, SDA, INT
V
IL
(Note 3) Low level input voltage −0.5 − 0.3 x V
CC
V
V
IH
(Note 3) High level input voltage 0.7 x V
CC
− 5.5 V
I
OL
Low level output current V
OL
= 0.4 V 3 − − mA
I
L
Leakage current V
I
= V
CC
or V
SS
−1 − +1
mA
C
I
(Note 4) Input capacitance V
I
= V
SS
− − 6 pF
C
O
(Note 4) Output capacitance V
O
= V
SS
− − 8 pF
A0, A1, A2
V
IL
(Note 3) Low level input voltage −0.5 − 0.8 V
V
IH
(Note 3) High level input voltage 2.0 − 5.5 V
I
LI
Input leakage current −1 − 1
mA
I/Os
V
IL
Low level input voltage −0.5 − 0.8 V
V
IH
High level input voltage 2.0 − 5.5 V
I
OL
Low level output current
V
OL
= 0.5 V; V
CC
= 2.3 V (Note 5) 8 10 − mA
V
OL
= 0.7 V; V
CC
= 2.3 V (Note 5) 10 13 − mA
V
OL
= 0.5 V; V
CC
= 4.5 V (Note 5) 8 17 − mA
V
OL
= 0.7 V; V
CC
= 4.5 V (Note 5) 10 24 − mA
V
OL
= 0.5 V; V
CC
= 3.0 V (Note 5) 8 14 − mA
V
OL
= 0.7 V; V
CC
= 3.0 V (Note 5) 10 19 − mA
V
OH
High level output
voltage
I
OH
= −8 mA; V
CC
= 2.3 V (Note 6) 1.8 − − V
I
OH
= −10 mA; V
CC
= 2.3 V (Note 6) 1.7 − − V
I
OH
= −8 mA; V
CC
= 3.0 V (Note 6) 2.6 − − V
I
OH
= −10 mA; V
CC
= 3.0 V (Note 6) 2.5 − − V
I
OH
= −8 mA; V
CC
= 4.75 V (Note 6) 4.1 − − V
I
OH
= −10 mA; V
CC
= 4.75 V (Note 6) 4.0 − − V
I
L
Input leakage current V
CC
= 3.6 V; V
I
= V
CC
− − 1
mA
C
I
(Note 4) Input capacitance − − 5 pF
C
O
(Note 4) Output capacitance − − 8 pF
3. V
IL
min
and V
IH
max
are reference values only and are not tested.
4. This parameter is characterized initially and after a design or process change that affects the parameter. Not 100% tested.
5. The total current sunk by all I/Os must be limited to 100 mA and each I/O limited to 25 mA maximum.
6. The total current sourced by all I/Os must be limited to 85 mA.
P1-P3P4-P6P7-P9P10-P12P13-P14

CAT9534YI-GT2

Mfr. #:
Buy CAT9534YI-GT2
Manufacturer:
ON Semiconductor
Description:
Interface - I/O Expanders 8B I2C &SMBus I/O PORT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet