FC30 Electrical specifications
Doc ID 14752 Rev 2 7/13
3 Electrical specifications
3.1 Electrical characteristics
Figure 5. Orientation accuracy angle
3.2 Absolute maximum ratings
Stresses above those listed as “absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 3. Electrical characteristics
(1)
(2)
Symbol Parameter Test conditions Min. Typ.
(3)
Max. Unit
Vdd Supply voltage 2.16 2.5 3.6 V
Vdd_IO I/O pins supply voltage 1.71 Vdd+0.1 V
Idd Supply current T = 25°C 0.3 0.4 mA
IddPdn
Current consumption in
power-down mode
T = 25°C 1 µA
Ton Turn-on time
(4)
30 ms
Ac Accuracy
(5)
±3 deg
Top Operating temperature range -40 +85 °C
Wh Product weight 30 mg
1. The product is factory calibrated at 2.5 V. The device can be used from 2.16 V to 3.6 V
2. All the parameters are specified @ Vdd=2.5 V, T = 25 °C unless otherwise noted
3. Typical specification are not guaranteed
4. Time to obtain valid data after exiting power-down mode
5. Accuracy defines the angle around the three orthogonal directions where orientation is detected (see Figure 5)
Accuracy
Gravity