IC Sockets XR2 F-5
XR2T Open-frame Sockets with Seal Tape
• Equipped with seal tape to prevent flux cleaning liquids from entering the Socket.
• The same round-pin, 4-point contact structure as the RX2A is used for the contacts.
• The seal tape is made of transparent polyethyle (adhesive portion) and yellow polypropolyene (non-adhesive portion).
■ Dimensions
■ Ordering Information
Appearance Sockets with DIP terminals
No. of
contacts
Row pitch (A)
(mm)
With 0.25-
µm gold
plating
With 0.75-µm gold
plating
With gold flash plating
8 7.62 XR2T-0811-N XR2T-0801-N XR2T-0821-N
14 7.62 XR2T-1411-N XR2T-1401-N XR2T-1421-N
16 7.62 XR2T-1611-N XR2T-1601-N XR2T-1621-N
18 7.62 XR2T-1811-N XR2T-1801-N XR2T-1821-N
20 7.62 XR2T-2011-N XR2T-2001-N XR2T-2021-N
22 10.16 XR2T-2211-N XR2T-2201-N XR2T-2221-N
24 15.24 XR2T-2411-N XR2T-2401-N XR2T-2421-N
24 10.16 XR2T-2463-N XR2T-2461-N XR2T-2467-N
24 7.62 XR2T-2473-N XR2T-2471-N XR2T-2477-N
28 15.24 XR2T-2811-N XR2T-2801-N XR2T-2821-N
32 15.24 XR2T-3211-N XR2T-3201-N XR2T-3221-N
40 15.24 XR2T-4011-N XR2T-4001-N XR2T-4021-N
48 15.24 XR2T-4811-N XR2T-4801-N ---
Adhesive side
Non-adhesive side
Seal tape
0.51 dia.
1.33 dia.
Mounting holes (bottom view)
0.8 ±0.05 dia. (DIP terminals)
XR2T-@@11-N
XR2T-2463-N
XR2T-2473-N
XR2T-@@01-N
XR2T-2461-N
XR2T-2471-N
XR2T-@@21-N
XR2T-2467-N
XR2T-2477-N
Dimensions
Note: 1. XR2T-2411-N/XR2T-2401-N/
XR2A-2421-N
2. XR2T-2463-N/XR2T-2461-N/
XR2T-2467-N
3. XR2T-2473-N/XR2T-2471-N/
XR2T-2477-N
No. of contacts Dimensions (mm)
AB
8 7.62 7.62
14 7.62 15.24
16 7.62 17.78
18 7.62 20.32
20 7.62 22.86
22 10.16 25.40
24
(See note 1.)
15.24 27.94
24
(See note 2.)
10.16 27.94
24
(See note 3.)
7.62 27.94
28 15.24 33.02
32 15.24 38.10
40 15.24 48.26
48 15.24 58.42
