OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SE2613T-R

P1-P3P4-P6P7-P9P10-P11
DATA SHEET
SE2613T: 2.4 GHz Wireless LAN/BT Front-End
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202406A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 1
Applications
IEEE802.11b DSSS WLAN
IEEE802.11g,n OFDM WLAN
Embedded applications with Bluetooth (Mobile)
Features
Dual Mode IEEE802.11b & IEEE802.11g
Integrated PA, Harmonic Filter, LNA and BT port
Integrated Positive Slope Power Detector
17.5 dBm @ 4.0 % EVM, 802.11g, 54 Mbps
Direct connection to battery with 3.6 V nominal
supply
Lead free, Halogen free and RoHS compliant
Compact package, 3 x 3 x 0.6 mm, MSL 1
Ordering Information
Part No. Package Remark
SE2613T
16 pin QFN
Samples
SE2613T-R
16 pin QFN
Tape and Reel
SE2613T-EK1
N/A
Evaluation kit
Product Description
The SE2613T is a complete 802.11 b/g/n WLAN RF
front-end module with a Bluetooth port. The device
provides all the functionality of the power amplifier,
power detector, harmonic filtering, switch, low noise
amplifier, and associated matching. The SE2613T
provides a complete 2.4 GHz WLAN RF solution from
the output of the transceiver to the antenna, and from
the antenna to the input of the transceiver, in an ultra
compact form factor.
The SE2613T is designed for ease of use, with all the
critical matching and harmonic filtering integrated,
also offering a simple 50 Ω interface to the antenna.
The SE2613T includes a low noise amplifier to
increase the receive sensitivity of embedded solutions
to improve range or to overcome the insertion loss of
cellular filters often included for mobile applications.
The SE2613T also includes a transmitter power
detector with 20 dB of dynamic range and a digital
enable control for transmitter power ramp on/off
control.
Functional Block Diagram
ANT
RX
LEN
VDD
VCC1VCC2
BT
TX
PEN
CBT
CRX
DET
Figure 1: Functional Block Diagram
DATA SHEET
SE2613T: 2.4 GHz Wireless LAN/BT Front-End
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202406A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 2
Pin Out Diagram
DET
VCC1
BT
CRX
VDD
RX CBT
ANT
GND
PEN
VCC2
NC
TX
GND
LEN
NC
6
1234
5
11 12
131415
7 8
9 10
16
Figure 2: SE2613T Pin out (Top View through Package)
Pin Out Description
Pin No. Name Description
1 Vcc2 PA Positive Power supply
2 DET Power Detector Output
3 Vcc1 PA Positive Power supply
4 TX Transmit port
5 NC Not connected
6 PEN PA enable control input
7 GND Ground
8 RX Receive port
9 VDD LNA and Switch Positive Power supply
10 LEN LNA enable control input
11 CRX Receive antenna switch control
12 BT Bluetooth port
13 CBT Bluetooth antenna switch control
14 GND Ground
15 ANT Antenna port
16 NC Not connected
Die
paddle
GND Ground
DATA SHEET
SE2613T: 2.4 GHz Wireless LAN/BT Front-End
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202406A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 3
Absolute Maximum Ratings
These are stress ratings only. Exposure to stresses beyond these maximum ratings (one rating applied at a time) for
extended periods may cause permanent damage to, or affect the reliability of the device. Avoid operating the device
outside the recommended operating conditions defined below. This device is ESD sensitive. Handling and assembly of this
device should be at ESD protected workstations.
Symbol Definition Min. Max. Unit
VCC PA Supply Voltage on VCC1, VCC2 -0.3 6.0 V
VDD LNA and Switch Supply Voltage -0.3 3.6 V
VIN DC input on control pins -0.3 3.6 V
P
TXIN
TX Input Power, ANT terminated in 50Ω match - 5 dBm
TA Operating Temperature Range -40 85 °C
TSTG Storage Temperature Range -40 150 °C
ESD
HBM
JEDEC JESD22-A114
All pins
1000
V
Recommended Operating Conditions
Symbol Parameter Min. Typ. Max. Unit
TA Ambient temperature -40 25 85 °C
VCC PA Supply voltage, relative to GND = 0 V 2.7 3.6 4.8 V
VDD LNA supply voltage, relative to GND = 0 V 2.7 3.3 3.6 V
DC Electrical Characteristics
Conditions: VCC = 3.6V, PEN = VDD= 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE2613T-EK1 evaluation
board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted
Symbol Parameter Conditions Min. Typ. Max. Unit
ICC-G Total Supply Current
POUT = 17.5 dBm, 54 Mbps
OFDM signal, 64QAM
- 140 mA
ICC-B Total Supply Current
P
OUT
= 20 dBm, 11 Mbps
CCK signal, BT = 0.45
- 160 mA
I
CQ
Quiescent Current No RF - 110 mA
ICC_OFF Total Supply Current
PEN = 0 V, No RF Applied,
CBT = PEN =CRX= 0 V
- 10 μA
IDD_OFF Total Supply Current
PEN = 0 V, No RF Applied,
CBT = PEN =CRX= 0 V
- 18 30 μA
Icc_LNA LNA Supply Current LEN =3.3V - 10 13 mA
Icc_LNA_
BYP
LNA bypass supply
current
LEN=0 50 μA
P1-P3P4-P6P7-P9P10-P11

SE2613T-R

Mfr. #:
Buy SE2613T-R
Manufacturer:
Skyworks Solutions, Inc.
Description:
RF Front End 2.4GHz 802.11bgn 3.6Volt -40C +85C
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet