THE INFORMATION CONTAINED IN THIS DRAWING IS CONFIDENTIAL AND MAY NOT BE
DISCLOSED WITHOUT WRITTEN CONSENT FROM SOURIAU USA, INC.
THIS DRAWING IS A CONTROLLED DOCUMENT FOR SOURIAU USA, INC.
IT IS SUBJECT TO CHANGE WITHOUT NOTIFICATION.
CONTACT THE DOCUMENT CONTROL CENTER FOR THE LATEST REVISION.
PRO-E
DWG. NO.
ANGLES#1$
#.010 [#0.25]
THREE PLACES
#.02 [#0.5]
TWO PLACES
#.1 [#3]
ONE PLACE
INCH [mm]
No. OF PLACES
TOLERANCES
UNLESS OTHERWISE SPECIFIED
THIRD ANGLE PROJECTION
LINEAR
MEASURE:
3 OF 6
www.souriau.com
INTERPRET THIS DRAWING IN ACCORDANCE
WITH ASME Y14.5M - 1994.
U
SA94843
REVDRAWING NO.
CUSTOMER
DRAWING SCALE: 1:1
11-15-10
QC : DK
APPROVAL
11-15-10
MFG : DH
10-13-92
DSGN : JDA
11-15-10
CHKD : SDH
11-15-10
DRAWN:
VKP
SIZE: ACAGE NO.: 09922
RBGT__ & RBMT__ (SEE TABLE, SHT. 2)
CAT NO.
TRACKS, GROUNDING & MOUNTING
DRAWING TITLE
---
ALL REV. RECORDED ON SHT. 1
--- ---
REV DESCRIPTION
BY
DATE
CHKD
DATE
SA94843
PERFORMANCE CHARACTERISTICS
ELECTRICAL:
CONTACT RESISTANCE: IN ACCORDANCE WITH MIL-T-81714. PARA. 4.6.16.
REF: MIL-STD-1344. METHOD 3004.
SIZE 16-20: 45 MILLIVOLTS MAX. AT 7.5A WITH
20 AWG SILVER PLATED WIRE.
LOW LEVEL CONTACT RESISTANCE: IN ACCORDANCE WITH MIL-T-81714. PARA. 4.6.17.
REF: MIL-STD-1344. METHOD 3002.
SIZE 16-20: .009 OHMS MAX. WITH
20 AWG SILVER PLATED WIRE.
VOLTAGE STABILITY: 4 MILLIVOLT MAX. DIFFERENCE BETWEEN RECORDED HIGHEST
AND LOWEST POTENTIAL DROP VALUES IN ACCORDANCE WITH
MIL-T-81714, PARA. 4.6.18.
ENVIRONMENTAL:
FLUID IMMERSION: ALL MATERIALS ARE RESISTANT TO BMS3-11 (SKYDROL LD-4) AND
MIL-H-5606 HYDRAULIC FLUIDS, AND MIL-L-7808 AND
MIL-L-23699 LUBRICATING OILS.
HUMIDITY: IN ACCORDANCE WITH MIL-T-81714, PARA. 4.6.10.
REF: MIL-STD-1344, METHOD 1002, TYPE II, (EXCEPT WITHOUT
STEP 7b)
SALT SPRAY: 500 HOURS IN ACCORDANCE WITH MIL-T-81714, PARA. 4.6.12.
REF: MIL-STD-1344, METHOD 1001, TEST CONDITION C.
VIBRATION (SINUSOIDAL): IN ACCORDANCE WITH MIL-T-81714, PARA. 4.6.8.1.
REF: MIL-STD-202, METHOD 204, TEST CONDITION G.
VIBRATION (RANDOM): IN ACCORDANCE WITH MIL-T-81714, PARA. 4.6.8.2.
REF: MIL-STD-1344, METHOD 2005, TEST CONDITION VI,LETTER J.
MECHANICAL (IMPACT) SHOCK: IN ACCORDANCE WITH MIL-T-81714, PARA. 4.6.9.
REF: MIL-STD-1344, METHOD 2004, TEST CONDITION D.
THERMAL SHOCK: IN ACCORDANCE WITH MIL-T-81714, PARA. 4.6.5.
REF: MIL-STD-1344, METHOD 1003, TEST CONDITION A,
(EXCEPT TEMPERATURE EXTREMES ARE -65$C TO +150$C
[-85$F TO +302$F]).
TEMPERATURE LIFE: 150$C [302$F] FOR 1000 HOURS IN ACCORDANCE WITH
MIL-T-81714, PARA. 4.6.13.
OZONE: IN ACCORDANCE WITH MIL-T-81714, PARA. 4.6.14.
REF: MIL-STD-1344, METHOD 1007.
