OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ADG5234BRUZ-RL7

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P22
High Voltage Latch-Up Proof,
Triple/Quad SPDT Switches
Data Sheet
ADG5233/ADG5234
Rev. D Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2011–2015 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
Latch-up proof
2.8 pF off source capacitance
9 pF off drain capacitance
0.4 pC charge injection
Low on resistance: 160 Ω typical
±9 V to ±22 V dual-supply operation
9 V to 40 V single-supply operation
48 V supply maximum ratings
Fully specified at ±15 V, ±20 V, +12 V, and +36 V
V
DD
to V
SS
analog signal range
Human body model (HBM) ESD rating
8 kV input/output port to supplies
2 kV input/output port to input/output port
8 kV all other pins
APPLICATIONS
Automatic test equipment
Data acquisition
Instrumentation
Avionics
Audio and video switching
Communication systems
FUNCTIONAL BLOCK DIAGRAMS
Figure 1. ADG5233 TSSOP and LFCSP_WQ
Figure 2. ADG5234 TSSOP and LFCSP_WQ
GENERAL DESCRIPTION
The ADG5233 and ADG5234 are monolithic industrial CMOS
analog switches comprising three independently selectable
single-pole, double throw (SPDT) switches and four indepen-
dently selectable SPDT switches, respectively.
All channels exhibit break-before-make switching action that
prevents momentary shorting when switching channels. An
EN
input on the ADG5233 (LFCSP and TSSOP packages) is used to
enable or disable the device. When disabled, all channels are
switched off.
The ultralow capacitance and charge injection of these switches
make them ideal solutions for data acquisition and sample-and-
hold applications, where low glitch and fast settling are required.
Fast switching speed coupled with high signal bandwidth make
these devices suitable for video signal switching.
PRODUCT HIGHLIGHTS
1. Trench Isolation Guards Against Latch-Up.
A dielectric trench separates the P and N channel transistors
thereby preventing latch-up even under severe overvoltage
conditions.
2. Ultralow Capacitance and 0.4 pC Charge Injection.
3. Dual-Supply Operation.
For applications where the analog signal is bipolar, the
ADG5233/ADG5234 can be operated from dual supplies
up to ±22 V.
4. Single-Supply Operation.
For applications where the analog signal is unipolar, the
ADG5233/ADG5234 can be operated from a single-rail
power supply up to 40 V.
5. 3 V Logic-Compatible Digital Inputs.
V
INH
= 2.0 V, V
INL
= 0.8 V.
6. No V
L
Logic Power Supply Required.
S1A
D1
S1B
S3B
D3
S3A
S2B
D2
S2A
ADG5233
IN1 IN2 IN3 EN
LOGIC
SWITCHES SHOWN FOR
A 1 INPUT LOGIC.
09919-001
ADG5234
SWITCHES SHOWN FOR
A 1 INPUT LOGIC.
S
1
A
D1
IN1
S1B
S2B
D2
IN2
S
2
A
S4A
D4
IN4
S4B
S3B
D3
IN3
S3A
09919-002
ADG5233/ADG5234 Data Sheet
Rev. D | Page 2 of 22
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications ....................................................................................... 1
Functional Block Diagrams ............................................................. 1
General Description ......................................................................... 1
Product Highlights ........................................................................... 1
Revision History ............................................................................... 2
Specifications ..................................................................................... 3
±15 V Dual Supply ....................................................................... 3
±20 V Dual Supply ....................................................................... 4
12 V Single Supply ........................................................................ 5
36 V Single Supply ........................................................................ 6
Continuous Current per Channel, Sx or Dx ..............................7
Absolute Maximum Ratings ............................................................9
ESD Caution...................................................................................9
Pin Configurations and Function Descriptions ......................... 10
Typical Performance Characteristics ........................................... 12
Test Circuits ..................................................................................... 16
Terminology .................................................................................... 18
Trench Isolation .............................................................................. 19
Applications Information .............................................................. 20
Outline Dimensions ....................................................................... 21
Ordering Guide .......................................................................... 22
REVISION HISTORY
8/15—Rev. C to Rev. D
Changes to Features Section............................................................ 1
Changes to Table 1 ............................................................................ 3
Changes to Table 2 ............................................................................ 4
Changes to Table 3 ............................................................................ 5
Changes to Table 4 ............................................................................ 6
Changes to Table 7 ............................................................................ 9
Changes to Figure 20 Caption to Figure 22 Caption ................. 14
Changes to Figure 23 Caption to Figure 25 Caption ................. 15
Deleted Figure 20 and Figure 22; Renumbered Sequentially ... 15
Deleted Figure 24, Figure 26, and Figure 28 ............................... 16
Deleted Figure 30 ............................................................................ 17
12/14—Rev. B to Rev. C
Changes to Features Section and Product Highlights Section ... 1
Changes to Table 1 ............................................................................ 3
Changes to Table 2 ............................................................................ 4
Changes to Table 3 ............................................................................ 6
Changes to Table 4 ............................................................................ 7
Change to Table 7 ............................................................................. 9
Changes to Figure 7 to Figure 12 .................................................. 13
Changes to Figure 13 and Figure 14............................................. 14
Changes to Figure 19, Figure 20 Caption, and
Figure 22 Caption .......................................................................... 15
Added Figure 21 and Figure 23; Renumbered Sequentially ..... 15
Changes to Figure 24 Caption, Figure 26 Caption, and
Figure 28 Caption ........................................................................... 16
Added Figure 25, Figure 27, and Figure 28 ................................. 16
Changes Figure 30 Caption ........................................................... 17
Added Figure 31.............................................................................. 17
Changes to Figure 34 ...................................................................... 18
6/13—Rev. A to Rev. B
Added 20-Lead LFCSP ...................................................... Universal
Updated Outline Dimensions ....................................................... 21
Changes to Ordering Guide .......................................................... 22
3/12—Rev. 0 to Rev. A
Added 16-Lead LFCSP ...................................................... Universal
Changes to Ordering Guide .......................................................... 22
7/11—Revision 0: Initial Version
Data Sheet ADG5233/ADG5234
Rev. D | Page 3 of 22
SPECIFICATIONS
±15 V DUAL SUPPLY
V
DD
= +15 V ± 10%, V
SS
= −15 V ± 10%, GND = 0 V, unless otherwise noted.
Table 1.
Parameter 25°C −40°C to +85°C −40°C to +125°C Unit Test Conditions/Comments
ANALOG SWITCH
Analog Signal Range V
DD
to V
SS
V
On Resistance, R
ON
160 Ω typ V
S
= ±10 V, I
S
= −1 mA;
see Figure 28
200 250 280 Ω max V
DD
= +13.5 V, V
SS
= −13.5 V
On-Resistance Match Between
Channels, ∆R
ON
3.5 Ω typ V
S
= ±10 V, I
S
= −1 mA
8 9 10 Ω max
On-Resistance Flatness, R
FL AT (ON)
38
Ω typ
V
S
= ±10 V, I
S
= −1 mA
50 65 70 Ω max
LEAKAGE CURRENTS V
DD
= +16.5 V, V
SS
= −16.5 V
Source Off Leakage, I
S
(Off ) ±0.02 nA typ
V
S
= ±10 V, V
D
=
10 V;
see Figure 30
±0.1 ±0.2 ±0.4 nA max
Drain Off Leakage, I
D
(Off ) ±0.02 nA typ
V
S
= ±10 V, V
D
=
10 V;
see Figure 30
±0.1 ±0.2 ±0.4 nA max
Channel On Leakage, I
D
(On), I
S
(On)
±0.08
nA typ
V
S
= V
D
= ±10 V; see Figure 26
±0.2
±0.3
±0.9
nA max
DIGITAL INPUTS
Input High Voltage, V
INH
2.0
V min
Input Low Voltage, V
INL
0.8
V max
Input Current, I
INL
or I
INH
0.002 µA typ V
IN
= V
GND
or V
DD
±0.1 µA max
Digital Input Capacitance, C
IN
3 pF typ
DYNAMIC CHARACTERISTICS
1
Transition Time, t
TRANSITION
125 ns typ R
L
= 300 Ω, C
L
= 35 pF
160 190 215 ns max V
S
= 10 V; see Figure 33
t
ON
(
EN
) 145 ns typ R
L
= 300 Ω, C
L
= 35 pF
175
210
240
ns max
V
S
= 10 V; see Figure 35
t
OFF
(
EN
) 125 ns typ R
L
= 300 Ω, C
L
= 35 pF
155 170 180 ns max V
S
= 10 V; see Figure 35
Break-Before-Make Time Delay, t
D
45 ns typ R
L
= 300 Ω, C
L
= 35 pF
25 ns min V
S1
= V
S2
= 10 V; see Figure 34
Charge Injection, Q
INJ
0.4 pC typ V
S
= 0 V, R
S
= 0 Ω, C
L
= 1 nF;
see Figure 36
Off Isolation −76 dB typ R
L
= 50 Ω, C
L
= 5 pF, f = 1 MHz;
see Figure 31
Channel-to-Channel Crosstalk −87 dB typ R
L
= 50 Ω, C
L
= 5 pF, f = 1 MHz;
Figure 29
−3 dB Bandwidth 355 MHz typ R
L
= 50 Ω, C
L
= 5 pF;
see Figure 32
Insertion Loss −6.4 dB typ R
L
= 50 Ω, C
L
= 5 pF, f = 1 MHz;
see Figure 32
C
S
(Off ) 2.8 pF typ V
S
= 0 V, f = 1 MHz
C
D
(Off ) 9 pF typ V
S
= 0 V, f = 1 MHz
C
D
(On), C
S
(On)
13
pF typ
V
S
= 0 V, f = 1 MHz
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P22

ADG5234BRUZ-RL7

Mfr. #:
Buy ADG5234BRUZ-RL7
Manufacturer:
Analog Devices Inc.
Description:
Analog Switch ICs High VTG Latch-Up Proof Quad SPDT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet