501MLFT Datasheet 501MLFT, 501MLF, 501MILF | P7-P9

ICS501

LOCO™ PLL CLOCK MULTIPLIER CLOCK MULTIPLIER

IDT™ / ICS™

LOCO™ PLL CLOCK MULTIPLIER 7

ICS501 REV S 20170331

Package Outline and Package Dimensions (8-pin SOIC, 150 Mil. Narrow Body)

Package dimensions are kept current with JEDEC Publication No. 95

INDEX

AREA

1 2

SEATING

PLANE

- C -

.10 (.004)



h x 45

*For reference only. Controlling dimensions in mm.

Millimeters Inches*

Symbol Min Max Min Max

A 1.35 1.75 .0532 .0688

A1 0.10 0.25 .0040 .0098

B 0.33 0.51 .013 .020

C 0.19 0.25 .0075 .0098

D 4.80 5.00 .1890 .1968

E 3.80 4.00 .1497 .1574

e 1.27 BASIC 0.050 BASIC

H 5.80 6.20 .2284 .2440

h 0.25 0.50 .010 .020

L 0.40 1.27 .016 .050

 0 8 0 8

ICS501

LOCO™ PLL CLOCK MULTIPLIER CLOCK MULTIPLIER

IDT™ / ICS™

LOCO™ PLL CLOCK MULTIPLIER 8

ICS501 REV S 20170331

Ordering Information

"LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes no responsibility

for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses

are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range,

high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to

change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical

instruments.

Part / Order Number Marking Shipping Packaging Package Temperature

501MLF 501MLF Tubes 8-pin SOIC 0 to +70 C

501MLFT 501MLF Tape and Reel 8-pin SOIC 0 to +70 C

501MILF 501MILF Tubes 8-pin SOIC -40 to +85C

501MILFT 501MILF Tape and Reel 8-pin SOIC -40 to +85C

501GLF 01GL Tubes 8-pin MSOP 0 to +70 C

501GLFT 01GL Tape and Reel 8-pin MSOP 0 to +70 C

501GILF 1GIL Tubes 8-pin MSOP -40 to +85C

501GILFT 1GIL Tape and Reel 8-pin MSOP -40 to +85C

501-DWF - Die on uncut, probed wafers 0 to +70 C

501-DPK - Tested die in waffle pack 0 to +70 C

501E-DPK - Tested die in waffle pack 0 to +70 C

DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described

herein at any time, without notice, at IDT’s sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and

are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether

express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual

property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.

IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an

IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express,

written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks

used herein are the property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. Integrated

Corporate Headquarters

Integrated Device Technology, Inc.

www.idt.com

For Sales

800-345-7015

408-284-8200

Fax: 408-284-2775

For Tech Support

www.idt.com/go/support

Innovate with IDT and accelerate your future networks. Contact:

www.IDT.com

ICS501

LOCO™ PLL CLOCK MULTIPLIER CLOCK MULTIPLIER

P1-P3 P4-P6 P7-P9

501MLFT

Mfr. #:

Buy 501MLFT

Manufacturer:

IDT

Description:

Clock Generators & Support Products LOCO PLL CLOCK MULTIPLIER

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

501MLFT

501MLFT

Products related to this Datasheet