© Semiconductor Components Industries, LLC, 2015
December, 2015 − Rev. 2
1 Publication Order Number:
NCP708/D
NCP708
1 A, 1% Precision Very Low
Dropout Voltage Regulator
with Enable
The NCP708 is a Very Low Dropout Regulator which provides up to
1 A of load current and maintains excellent output voltage accuracy of
1.5% including line, load and temperature variations. The operating
input voltage range from 2.4 V up to 5.5 V makes this device suitable
for Li−ion battery powered products as well as post−regulation
applications. The product is available in 3.3 V fixed output voltage
option. Other voltage options are possible on request. NCP708 is fully
protected against overheating and output short circuit.
Small 6−pin UDFN6 3x3 package makes the device especially
suitable for space constrained applications.
Features
• Operating Input Voltage Range: 2.4 V to 5.5 V
• Fixed Output Voltage Option: 3.3 V
Other Output Voltage Options Available on Request.
• Low Quiescent Current of Typ. 200 mA
• Very Low Dropout: 250 mV Max. at I
OUT
= 1 A
• ±1.5% Accuracy Over Load/Line/Temperature
• High PSRR: 70 dB at 1 kHz
• Internal Soft−Start to Limit the Inrush Current
• Thermal Shutdown and Current Limit Protections
• Stable with a 4.7 mF Ceramic Output Capacitor
• Available in UDFN6 3x3 mm Package
• These are Pb−Free Devices
Typical Applications
• Hard−Drives, SSDs
• Servers, Networking Equipment
• Telecom Equipment
• Battery Powered Applications
Figure 1. Typical Application Schematic
NCP708
IN
EN
OUT
GND
OFF
ON
V
OUT
= 3.3 V @ 1 A
C
OUT
4.7 mF
Ceramic
C
IN
V
IN
= 3.6 − 5.5 V
SNS
UDFN6
CASE 517DD
MARKING
DIAGRAM
www.onsemi.com
See detailed ordering, marking and shipping information on
page 8 of this data sheet.
ORDERING INFORMATION
(Note: Microdot may be in either location)
1
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb−Free Package
708
330
ALYWG
G
1
PIN CONNECTION
1
2
3
6
5
4
(Top View)
EN
GND
N/C
IN
OUT_s
OUT