3
FN6798.2
October 16, 2015
Absolute Maximum Ratings Thermal Information
Supply (V+ to GND) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.0V
Input Pins. . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +0.3V above V+
Combined Peak Output Current. . . . . . . . . . . . . . . . . . . . . . . . . . .4A
Maximum Recommended Operating Conditions
Recommended Operating V+ Range. . . . . . . . . . . . . . 4.5V to 18.0V
Input Pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0V to V+
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125°C
Power Dissipation
8 Ld SOIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .570mW
8 Ld PDIP* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1050mW
Storage Temperature Range . . . . . . . . . . . . . . . . . .-65°C to +150°C
Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C
Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
*Pb-free PDIPs can be used for through-hole wave solder
processing only. They are not intended for use in Reflow solder
processing applications.
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: T
J
= T
C
= T
A
DC Electrical Specifications T
A
= +25°C, V = 18V unless otherwise specified; Parameters with MIN and/or MAX limits are 100% tested
at +25°C, unless otherwise specified. Temperature limits established by characterization and are not
production tested.
PARAMETER DESCRIPTION TEST CONDITIONS MIN TYP MAX UNITS
INPUT
V
IH
Logic “1” Input Voltage 2.4 V
I
IH
Logic “1” Input Current @V+ 0.1 10 µA
V
IL
Logic “0” Input Voltage 0.8 V
I
IL
Logic “0” Input Current @0V 0.1 10 µA
V
HVS
Input Hysteresis 0.3 V
OUTPUT
R
OH
Pull-Up Resistance I
OUT
= -100mA 3 6
R
OL
Pull-Down Resistance I
OUT
= +100mA 4 6
I
PK
Peak Output Current Source 2 A
Sink 2 A
I
DC
Continuous Output Current Source/Sink 100 mA
POWER SUPPLY
I
S
Power Supply Current Inputs High/ISL89410 4.5 7.5 mA
Inputs High/ISL89411 1 2.5 mA
Inputs High/ISL89412 2.5 5.0 mA
V
S
Operating Voltage 4.5 18 V
AC Electrical Specifications T
A
= +25°C, V = 18V unless otherwise specified.
PARAMETER DESCRIPTION TEST CONDITIONS MIN TYP MAX UNITS
SWITCHING CHARACTERISTICS
t
R
Rise Time (Note 1) C
L
= 500pF 7.5 ns
C
L
= 1000pF 10 20 ns
t
F
Fall Time (Note 1) C
L
= 500pF 10 ns
C
L
= 1000pF 13 20 ns
t
D1
Turn-On Delay Time (Note 1) See “Timing Table” on page 4 18 25 ns
t
D2
Turn-Off Delay Time (Note 1) See“Timing Table” on page 4 20 25 ns
NOTE:
1. Limits established by characterization and are not production tested.
ISL89410, ISL89411, ISL89412