16
LT1505
1505fc
G Package
28-Lead Plastic SSOP (5.3mm)
(Reference LTC DWG # 05-08-1640)
LT/TP 1101 1.5K REV C • PRINTED IN USA
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
(408) 432-1900
●
FAX: (408) 434-0507
●
www.linear.com
PACKAGE DESCRIPTION
U
PART NUMBER DESCRIPTION COMMENTS
LT1372/LT1377 1.5A, 500kHz/1MHz Step-Up Switching Regulators High Frequency, Small Inductor, High Efficiency Switchers, SO-8
LT1376 1.5A, 500kHz Step-Down Switching Regulator High Frequency, Small Inductor, High Efficiency Switcher, SO-8
LT1510 Constant-Voltage/Constant-Current Battery Charger Up to 1.5A Charge Current, Small SO-8 Footprint
LT1511 3A Constant-Voltage/Constant-Current Battery Charger Charges Lithium, NiCd and NiMH Batteries, 28-Lead SO Package
LT1512 SEPIC CC/CV Battery Charger V
IN
Can Be Higher or Lower Than Battery Voltage, 2A Internal Switch
LT1513 SEPIC CC/CV Battery Charger V
IN
Can Be Higher or Lower Than Battery Voltage, 3A Internal Switch
LT1571 Constant-Voltage/Constant-Current Battery Charger 1.5A Charge Current, Preset Voltage for 1 or 2 Li-Ion Cells, C/10 Flag
LTC1731 Linear Charger Controller Programmable Timer; 8-Pin MSOP; C/10 Flag
LTC1732 Linear Charger Controller AC Adapter Present Flag; Programmable Timer; 10-Pin MSOP; C/10 Flag
LTC1733 Linear Charger with Integrated FET 1.5A Charge Current, Programmable Timer,
10-Pin Thermally Enhanced MSOP Package
LTC1734 Linear Charger Controller Inexpensive Constant-Voltage/Constant-Current Li-Ion Charger,
5-Pin SOT-23 Package
LTC1759 SMBus Controlled Smart Battery Charger LT1505 Charger Functionality with SMBus Control
LT1769 2A Constant-Voltage/Constant-Current Battery Charger Charges Lithium, NiCd and NiMH Batteries, 20-Lead Exposed Pad TSSOP
LTC1960 Dual Battery Charger and Selector with SPI Interface I
CHARGE
up to 6A, Fast Charge, Longer Battery Life, Crisis Management
RELATED PARTS
LINEAR TECHNOLOGY CORPORATION 1999
G28 SSOP 0501
.13 – .22
(.005 – .009)
0
° – 8°
.55 – .95
(.022 – .037)
5.20 – 5.38**
(.205 – .212)
7.65 – 7.90
(.301 – .311)
1234
5
6
7
8 9 10 11 12 1413
10.07 – 10.33*
(.397 – .407)
2526 22 21 20 19 18
17
16 1523242728
1.73 – 1.99
(.068 – .078)
.05 – .21
(.002 – .008)
.65
(.0256)
BSC
.25 – .38
(.010 – .015)
MILLIMETERS
(INCHES)
DIMENSIONS DO NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED .152mm (.006") PER SIDE
DIMENSIONS DO NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED .254mm (.010") PER SIDE
*
**
NOTE:
1. CONTROLLING DIMENSION: MILLIMETERS
2. DIMENSIONS ARE IN
3. DRAWING NOT TO SCALE
