OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

RPS-1K-10-2/2.0-9

P1-P3P4-P6P7-P9P10-P10
SPECIFICATION RW 2510 ISSUE 2 Page 7
©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
RW-2510 Issue 2
*Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of
their respective owners.
If this document is printed it becomes uncontrolled.
FIGURE #1
Dimensions in mm (inches)
3.05 (0.120)
4.83 ± 0.25
(0.190 ± 0.010)
80.52 ± 1.52
(3.170 ± 0.060)
38.10 ± 0.25
(1.500 ± 0.010)
48.26 MIN
(1.900)
12.70
(0.500)
TYP
TYP
4.01 DIA ± 0.13
(0.158 ± 0.005)
CARRIER
SLEEVE
WIDTH
PROGRESSION
SLEEVE
0.56 MAX
(0.022)
Page 8 SPECIFICATION RW 2510 ISSUE 2
©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
RW-2510 Issue 2
*Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of
their respective owners.
If this document is printed it becomes uncontrolled.
TABLE 3
DIMENSIONAL REQUIREMENTS
IN mm, (INCHES)
Part Number
Minimum
Maximum
Recovered wall
thickness
Sleeve
progression
Nominal
Expanded
Recovered
Sleeve
Inside Dia.
Inside Dia.
Weight (g)
RPS 22-18
3.18
(0.125)
1.07
(0.042)
0.58 +/- 0.08
(0.023 +/- 0.003)
12.70 +/- 0.89
(0.500 +/- 0.035)
0.203
RPS 18-12
4.75
(0.187)
1.57
(0.062)
0.58 +/- 0.08
(0.023 +/- 0.003)
12.70 +/- 0.89
(0.500 +/- 0.035)
0.268
RPS 16-10
6.35
(0.250)
2.11
(0.083)
0.58 +/- 0.08
(0.023 +/- 0.003)
16.94 +/- 0.89
(0.667 +/- 0.035)
0.351
RPS 8-4
9.53
(0.375)
3.18
(0.125)
0.61 +/- 0.08
(0.024 +/- 0.003)
25.40 +/- 1.14
(1.000 +/- 0.045)
0.504
RPS 10-2
12.70
(0.500)
4.22
(0.166)
0.61 +/- 0.08
(0.024 +/- 0.003)
29.64 +/- 1.14
(1.167 +/- 0.045)
0.681
RPS 6-250
19.05
(0.750)
6.35
(0.250)
0.61 +/- 0.08
(0.024 +/- 0.003)
42.34 +/- 1.14
(1.667 +/- 0.045)
1.023
RPS 1-400
25.40
(1.000)
8.46
(0.333)
0.64 +/- 0.08
(0.025 +/- 0.003)
50.80 +/- 1.14
(2.000 +/- 0.045)
1.353
RPS 400-1000
38.10
(1.500)
19.05
(0.750)
0.51 +/- 0.08
(0.020 +/- 0.003)
71.96 +/- 1.14
(2.833 +/- 0.045)
2.198
SPECIFICATION RW 2510 ISSUE 2 Page 9
©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
RW-2510 Issue 2
*Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of
their respective owners.
If this document is printed it becomes uncontrolled.
TABLE 4
Requirements
PROPERTY
UNIT
REQUIREMENT
TEST METHOD
Dimensions
mm
In accordance with Table 3
Section 4.3.1
(inches)
In accordance with Table 3
ASTM D 2671
Longitudinal Change
Section 4.3.1
3 min. at 200° ± 5
o
C (392° ± 9
o
F)
Percent
0 to -20
ASTM D 2671
Tensile Strength
508 mm/min. (20 in./min)
MPa
(psi)
8.27 minimum
(1,200) minimum
Section 4.3.2
ASTM D 2671
Ultimate Elongation
508 mm/min. (20 in./min)
Percent
150 minimum
Section 4.3.2
ASTM D 2671
Low Temperature Flexibility
---
No cracking
Section 4.3.3
4 hours at -30° ± 2
o
C (-22° ± 4
o
F)
Print Performance
Eraser Rub - 20 rubs, 2lbs
Solvent / Brush - 30 strokes
---
---
Legible at 356 mm (14 inches)
Legible at 356 mm (14 inches)
Section 4.3.4.1
Section 4.3.4.3
Heat Shock
---
No dripping, flowing,
Section 4.3.5
1 hr. at 136° ± 2
o
C (277 ± 4
o
F)
or cracking
UL 224
Heat Aging
168 hrs. at 158° ± 2
o
C (316 ± 4
o
F)
---
Section 4.3.6
Followed by test for: Mandrel Bend
---
No cracking
Section 4.3.6.1
Followed by: Print Performance
Eraser Rub - 20 rubs
---
Legible at 356 mm (14 inches)
Section 4.3.6.2
Dielectric Strength
MV/m
(Volts/mil)
19.7 minimum
(500 minimum)
Section 4.3.7
ASTM D 2671
Corrosive Effect
16 hours at 158 ± 2
o
C (316° ± 4
o
F)
---
5% transparent area maximum
Section 4.3.8
ASTM D 2671
Procedure A
Flammability
---
Burn time shall not exceed one
minute, and not more than 25%
of indicator flag shall be burned
or charred. No dripping or
flowing.
Section 4.3.9
UL 224 - All
Tubing Flame
Test
Water Absorption
Section 4.3.10
24 hours at 23° ± 3
o
C (73° ± 5
o
F)
Percent
0.5 maximum
ASTM D 2671
Fungus Resistance
56 day incubation
Section 4.3.11
ISO 846 B
Followed by test for:
Tensile Strength
MPa (psi)
8.27 (1,200) minimum
Section 4.3.11.1
ISO 846 B
Ultimate Elongation
Percent
150 minimum
Section 4.3.11.2
ISO 846 B
Dielectric Strength
Kv / mm
(Volts / mil)
19.7 minimum
(500) minimum
Section 4.3.11.3
ISO 846 B
P1-P3P4-P6P7-P9P10-P10

RPS-1K-10-2/2.0-9

Mfr. #:
Buy RPS-1K-10-2/2.0-9
Manufacturer:
TE Connectivity
Description:
Wire & Harness ID Products
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet